RT100KP28A Datasheet, PDF (1/4 Pages) MDE Semiconductor, Inc. – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: [phone] • Fax: [phone]
1-800-831-4881 Email: [e-mail] Web: www.mdesemiconductor.com
RT100KP SERIES
DRAFT
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-28.0 TO 400 Volts
100,000 Watt Peak Pulse Power
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• Glass passivated junction
• 100, 000W Peak Pulse Power
capability on 6.4/69 µs waveform
• Excellent clamping capability
• Repetition rate (duty cycle):0.05%
• Low incremental surge resistance
• Fast response time: typically less
than 1.0 ps from 0 volts to BV
• High temperature soldering guaranteed:
265°C/10 seconds/.375", (9.5mm) lead
length, 5lbs., (2.3kg) tension
100 KW Transient Voltage Suppressor (TVS) are
designed for aircraft applications requiring high power
transient protection. This includes various threats such as
"Waveform 4" at 6.4/69 µs per RTCA/DO-160E Section22.
MECHANICAL DATA
Case:Molded plastic over glass passivated junction
Terminals: Plated Tin Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.07 ounce, 2.5 gram
P-600
.360(9.1)
.340(8.6)
DIA
1.0(25.4) MIN
.360(9.1)
.340(8.6)
.052(1.3)
.048(1.2)
1.0(25.4) MIN
DIA
Dimensions in inches (milimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types RT100KP28 thru types RT100KP400
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation on 6.4/69 µs
waveform
Peak Pulse Current of on 6.4/69 µs waveform
SYMBOL
P_PPM
I_PPM
VALUE
Minimum 100,000
SEE TABLE 1
Steady State Power Dissipation at Tl=75 °C
Lead Lengths.375", (9.5mm)(NOTE 2)
P_M(AV)
8.0
Peak Forward Surge Current, 8.3ms Sine-Wave
Superimposed on Rated Load, (JEDEC Method)
(NOTE 3)
Operatings and Storage Temperature Range
NOTES:
I_FSM
T_J, T_STG
400.0
-55 to +175
1.Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2.Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.
3.8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum
UNITS
Watts
Amps
Watts
Amps
°C
Certified RoHS Compliant