P6SMB6.8A Datasheet, PDF (1/3 Pages) Motorola, Inc – ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS

MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: [phone] • Fax: [phone]
1-800-831-4881 Email: [e-mail] Web: www.mdesemiconductor.com
P6SMB SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 6.8 TO 550 Volts
600 Watt Peak Pulse Power
FEATURES
• For surface mounted applications in order to
optimize board space
• Glass passivated junction
• Built-in strain relief
• Excellent clamping capability
• Low profile package
• Low inductance
• Excellent clamping capability
• Fast response time: typically less than
1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
• High temperature soldering guaranteed:
250°C/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AA Molded plastic
Terminal： Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Standard Packaging: 12mm tape(EIA STD RS-481)
Weight: 0.003 ounces, 0.093 grams
Dimensions in inches (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use CA Suffix for types P6SMB6.8CA thru types P6SMB550CA
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms (Note 1)
Peak Pulse Current of on 10/1000 µs waveform (Note 1)
P_PPM
I_PPM
Minimum 600
SEE TABLE 1
Steady State Power Dissipation at TL = 75°C
Lead lengths .375", 9.5mm (Note 2)
P_M(AV)
1.0
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note 3)
I_FSM
100
Operatings and Storage Temperature Range
NOTES:
T_J, T_STG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 5.0mm² (0.03mm thick) Copper Pads to each termina
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Watts
Amps
°C
Certified RoHS Compliant
UL File # E223026