MX25L8036E Datasheet, PDF (42/49 Pages) Macronix International – 8M-BIT [x 1/x 2/x 4] CMOS SERIAL FLASH

MX25L8036E
OPERATING CONDITIONS
At Device Power-Up and Power-Down
AC timing illustrated in Figure 30 and Figure 31 are for the supply voltages and the control signals at device power-
up and power-down. If the timing in the figure is ignored, the device will not operate correctly.
During power-up and power down, CS# needs to follow the voltage applied on VCC to keep the device not to be se-
lected. The CS# can be driven low when VCC reach Vcc(min.) and wait a period of tVSL.
Figure 30. AC Timing at Device Power-Up
VCC(min)
VCC
GND
CS#
SCLK
SI
tVR
tCHSL
tSLCH
tDVCH
tCHDX
MSB IN
High Impedance
SO
tSHSL
tCHSH
tSHCH
tCLCH
LSB IN
tCHCL
Symbol
tVR
Parameter
VCC Rise Time
Notes
1
Min.
20
Max.
500000
Unit
us/V
Notes :
1. Sampled, not 100% tested.
2. For AC spec tCHSL, tSLCH, tDVCH, tCHDX, tSHSL, tCHSH, tSHCH, tCHCL, tCLCH in the figure, please refer to
"Table 10. AC CHARACTERISTICS".
P/N: PM1571
REV. 1.1, JUN. 13, 2012
42