MX29GL512E Datasheet, PDF (2/69 Pages) Macronix International – SINGLE VOLTAGE 3V ONLY FLASH MEMORY

MX29GL512E H/L
SINGLE VOLTAGE 3V ONLY FLASH MEMORY
The MX29GL512E product family is not recommended for new designs. The MX29GL512F
family is the recommended replacement. Please refer to MX29GL512F datasheet for
full specifications and ordering information, or contact your local sales representative for
additional support.
FEATURES
GENERAL FEATURES
• 2.7 to 3.6 volt for read, erase, and program operations
• Byte/Word mode switchable
- 67,108,864 x 8 / 33,554,432 x 16
• 64KW/128KB uniform sector architecture
- 512 equal sectors
• 16-byte/8-word page read buffer
• 64-byte/32-word write buffer
• Extra 128-word sector for security
- Features factory locked and identifiable, and customer lockable
• Advanced sector protection function (Solid and Password Protect)
• Compatible with JEDEC standard
- Pinout and software compatible to single power supply Flash
PERFORMANCE
• High Performance
- Fast access time: 110ns (VCC=2.7~3.6V), 100ns (VCC=3.0~3.6V)
- Page access time: 25ns
- Fast program time: 10us/word
- Fast erase time: 0.5s/sector
• Low Power Consumption
- Low active read current: 10mA (typical) at 5MHz
- Low standby current: 40uA (typical)
• Typical 100,000 erase/program cycle
• 20 years data retention
SOFTWARE FEATURES
• Program/Erase Suspend & Program/Erase Resume
• Status Reply
- Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface (CFI)
HARDWARE FEATURES
• Ready/Busy# (RY/BY#) Output
- Provides a hardware method of detecting program and erase operation completion
• Hardware Reset (RESET#) Input
- Provides a hardware method to reset the internal state machine to read mode
• WP#/ACC input pin
- Hardware write protect pin/Provides accelerated program capability
PACKAGE
• 56-Pin TSOP
• 64-Ball LFBGA (11mm x 13mm)
• 70-Pin SSOP
• All devices are RoHS Compliant and Halogen-free
P/N:PM1524
REV. 1.5, NOV. 13, 2013
2