MX29F040 Datasheet, PDF (13/40 Pages) Macronix International – 4M-BIT [512KX8] CMOS EQUAL SECTOR FLASH MEMORY

MX29F040
CAPACITANCE (TA = 25^oC, f = 1.0 MHz)
SYMBOL
CIN1
CIN2
COUT
PARAMETER
Input Capacitance
Control Pin Capacitance
Output Capacitance
MIN.
TYP
MAX.
8
12
12
UNIT
pF
pF
pF
CONDITIONS
VIN = 0V
VIN = 0V
VOUT = 0V
READ OPERATION
DC CHARACTERISTICS (TA = 0^° C TO 70^° C, -40^oC to 85^oC,VCC = 5V±10%)
SYMBOL
ILI
ILO
ISB1
ISB2
ICC1
ICC2
VIL
VIH
VOL
VOH1
VOH2
PARAMETER
MIN.
TYP
Input Leakage Current
Output Leakage Current
Standby VCC current
1
Operating VCC current
Input Low Voltage
-0.3(NOTE 1)
Input High Voltage
2.0
Output Low Voltage
Output High Voltage(TTL) 2.4
Output High Voltage(CMOS) VCC-0.4
MAX.
1
10
1
5
30
50
0.8
VCC + 0.3
0.45
UNIT
uA
uA
mA
uA
mA
mA
V
V
V
V
V
CONDITIONS
VIN = GND to VCC
VOUT = GND to VCC
CE = VIH
CE = VCC + 0.3V
IOUT = 0mA, f=5MHz
IOUT = 0mA, f=10MHz
IOL = 2.1mA
IOH = -2mA
IOH = -100uA,VCC=VCC MIN
NOTES:
1. VIL min. = -1.0V for pulse width is equal to or less than 50 ns. 2. VIH max. = VCC + 1.5V for pulse width is equal to or less
VIL min. = -2.0V for pulse width is equal to or less than 20 ns. than 20 ns.
If VIH is over the specified maximum value, read operation
cannot be guaranteed.
AC CHARACTERISTICS (TA = 0^oC to 70^oC, -40^oC to 85^oC,VCC = 5V±10%)
29F040-55(note2)29F040-70 29F040-90 29F040-12
Symbol PARAMETER
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX. Unit
tACC Address to Output Delay
55
70
90
120 ns
tCE CE to Output Delay
55
70
90
120 ns
tOE OE to Output Delay
30
40
40
50 ns
tDF OE High to Output Float (Note1) 0
30
0 30 0 40 0 40 ns
tOH Address to Output hold
0
0
0
0
ns
Conditions
CE=OE=VIL
OE=VIL
CE=VIL
CE=VIL
CE=OE=VIL
TEST CONDITIONS:
• Input pulse levels: 0.45V/2.4V
• Input rise and fall times is equal to or less than 0ns
• Output load: 1 TTL gate + 100pF (Including scope and jig)
• Reference levels for measuring timing: 0.8V, 2.0V
NOTE:
1. tDF is defined as the time at which the output achieves the
open circuit condition and data is no longer driven.
2. Under condition of VCC=5V±10%,CL=50pF,VIH/VIL=3.0/
0V,VOH/VOL=1.5/1.5V,IOL=2mA,IOH=-2mA.
P/N:PM0538
REV. 2.3, DEC. 10, 2004
13