MX98715AEC-E Datasheet, PDF (1/39 Pages) Macronix International – SINGLE CHIP FAST ETHERNET NIC CONTROLLER - ENHANCED VERSION

ADVANCED INFORMATION
MX98715AEC-E
1. FEATURES
SINGLE CHIP FAST ETHERNET NIC CONTROLLER
- ENHANCED VERSION
• A single chip solution integrates 100/10 Base-T fast
Ethernet MAC, PHY and PMD.
• Microsoft PC97, 98, 99 and Novell 4.11/5.0 certified.
• Support DMI 2.0 management.
• Support Intel PXE remote boot device.
• Fully comply to IEEE 802.3u specification
• Operates over 100 meters of STP and category 5 UTP
cable
• Fully comply to PCI spec. 2.1 with clock frequency up
to 33MHz
• Fully comply to Advanced Configuration and Power
Interface (ACPI) Rev 1.1
• Fully comply to PCI Bus Power Management Inter-
face spec. Rev 1.1
• Support full and half duplex operations in both 100
Base-TX and 10 Base-T mode
• Supports 3 kinds of wake up events defined in Net-
work Device Class Power Management Spec 1.0.
Including:
- Magic Packet^TM
- Link Change(link-on)
- Wake Up Frame
• Supports IEEE802.3x Frame Based Flow Control
scheme in full duplex mode.
• Supports early interrupt on both transmit and receive
operations.
• 100/10 Base-T NWAY auto negotiation function
• Large on-chip FIFOs for both transmit and receive
operations without external local memory
• Bus master architecture with linked host buffers deliv-
ers the most optimized performance
• 32-bit bus master DMA channel provides ultra low
CPU utilization, best fit in server and windows appli-
cation.
• Proprietary Adaptive Network Throughput Control
(ANTC) technology to optimize data integrity and
throughput
• Support up to 64K bytes boot ROM interface
• Three levels of loopback diagnositic capability
• Support a variety of flexible address filtering modes
with 16 CAM address and 128 bits hash
• MicroWire interface to EEPROM for customer's IDs
and configuration data
• Single +5V power supply, CMOS technology, 128-pin
PQFP package/LQPF package
2. GENERAL DESCRIPTIONS
The MX98715AEC-E controller is an IEEE802.3u com-
pliant single chip 32-bit full duplex, 10/100Mbps highly
integrated Fast Ethernet combo solution, designed to
address high performance local area networking (LAN)
system application requirements.
MX98715AEC-E's PCI bus master architecture delivers
the optimized performance for future high speed and
powerful processor technologies. In other words, the
MX98715AEC-E not only keeps CPU utilization low while
maximizing data throughput, but it also optimizes the
PCI bandwidth providing the highest PCI bandwidth uti-
lization. To further reduce maintenance costs the
MX98715AEC-E uses drivers that are backward com-
patible with the original MXIC MX98713 series control-
lers.
The MX98715AEC-E contains a PCI local bus glueless
interface, a Direct Memory Access (DMA) buffer man-
agement unit, an IEEE802.3u-compliant Media Access
Controller (MAC), large Transmit and Receive FIFOs,
( Magic packet technology is a trademark of advanced Micro De-
vice Corp. )
and an on-chip 10 Base-T and 100 Base-TX transceiver
simplifying system design and improving high speed sig-
nal quality. Full-duplex operation are supported in both
10 Base-T and 100 Base-TX modes that increases the
controller's operating bandwidth up to 200Mbps.
Equipped with intelligent IEEE802.3u-compliant auto-ne-
gotiation, the MX98715AEC-E-based adapter allows a
single RJ-45 connector to link with the other IEEE802.3u-
compliant device without re-configuration.
In MX98715AEC-E, an innovative and proprietary de-
sign "Adaptive Network Throughput Control" (ANTC) is
built-in to configure itself automatically by MXIC's driver
based on the PCI burst throughput of different PCs. With
this proprietary design, MX98715AEC-E can always
optimize its operating bandwidth, network data integrity
and throughput for different PCs.
The MX98715AEC-E features Remote-Power-On and Re-
mote-Wake-Up capability and is compliant with the Ad-
vanced Configuration and Power Interface version 1.0
P/N:PM0676
REV. 0.2, MAR. 04, 2000
1