|
MX9691L Datasheet, PDF (1/41 Pages) Macronix International – SINGLE CHIP SOLID STATE DISK CONTROLLER | |||
|
MX9691L
SINGLE CHIP SOLID STATE DISK CONTROLLER
1. FEATURE
Host Interface
Buffer RAM Manager
⢠PCMCIA 2.1 and PC Card ATA standard compatible.
- Memory mapped or I/O operation.
⢠Compatible with all PC Card Services and Socket
Service.
⢠Fast ATA host-to-buffer burst transfer rates up to
20MB/sec. which support PIO mode 4(16.6MB/sec)
and DMA mode 2(16.6MB/sec).
⢠Automatic sensing of PCMCIA or True IDE host inter
face.
⢠Integrated PCMCIA attribute memory of 256 bytes
(CIS)
- CIS and Buffer RAM use same SRAM area to
simplify internal bus design
⢠PCMCIA card configuration register support.
⢠Polarity control for Host reset signal.
⢠PCMCIA twin card support.
⢠PCMCIA based ATA address decode support.
⢠Emulate the IBM task file for PC/AT.
⢠Separate status for Host reset signal and Host program
reset.
⢠Separate Host and Disk interrupt pins.
⢠Dual port circular Buffer RAM control
⢠1KB data Buffer RAM.
⢠Automatically correct error data in Buffer RAM.
- Single word error correct and double word detect.
⢠Provide logic to speed up Buffer RAM access.
⢠Support 8 bit as well as 16 bit transfer on host bus.
DSP core
⢠High performance MX93011 DSP (21Mips) core.
⢠4KB Internal RAM(direct access).
⢠2KB Internal expansion RAM(indirect access) for store
data or shadow ROM space.
⢠ICE debugging mode supported to ease system
verification.
⢠Lower power and automatic power saving operation.
- Automatic Standby Mode. (Operating Current < 10mA,
VCC=5.5V), wake-up by interrupt signal.
- Very Low Operating Current Sleep Mode.
(<1mA,VCC=5.5V), wake-up by Host reset signal or
Host program reset or ATA command asserted by host.
Flash Memory Interface
Technology
⢠Support all the control signals to execute read/ write/
erase operation for flash memory.
⢠Flexible Disk Capacity Configuration for series type or
linear type flash memory
- Upto 32MB(unformatted) capacity for 16 pcs. 16Mbit
linear type flash memory.
- Upto 1GB(unformatted) capacity for 32 pcs. 256Mbit
series type flash memory.
⢠Flash Memory Power Down or write protect control
support.
⢠Flash Memory Ready/Busy status detect.
⢠Inverted data bus control to reduce flash memory
program/erase operation in DOS FAT and ECC code
field.
⢠Optional store firmware in flash memory array w/o
external ROM while MXIC's MX29F1610(linear type)
used.
- Allow code fetch in Shadow ROM during flash
memory program or erase.
⢠128 pin LQFP(14X14X1.4 mm3)
⢠128 pin TQFP(14X14X1.0 mm3)
⢠0.6um Low-power, High-speed CMOS technology.
⢠5Volt ± 10% or 3.3Volt ± 5%.
Utility Support
⢠Provide integrated test environment with 82365SL-
compatible adaptor.
⢠Firmware upload from host and allows easy upgrade for
custom feature.
⢠Physical devices test cover basic PCB test after
assembly and more detial analysis.
⢠Logical sector test cover SSD functionality and data
transfer test.
P/N:PM0546
REV. 1.1, JUL. 02, 1999
1
|
▷ |