|
MX29LV128D Datasheet, PDF (1/73 Pages) Macronix International – 128M-BIT [16M x 8/8M x 16] SINGLE VOLTAGE 3V ONLY FLASH MEMORY | |||
|
MX29LV128D T/B
128M-BIT [16M x 8/8M x 16] SINGLE VOLTAGE 3V ONLY FLASH MEMORY
FEATURES
GENERAL FEATURES
⢠16,777,216 x 8 / 8,388,608 x 16 switchable
⢠Sector Structure
- 8KB(4KW) x 8 and 64KB(32KW) x 255
⢠Extra 128-word sector for security
- Features factory locked and identifiable, and customer lockable
⢠Sector Groups Protection / Chip Unprotect
- Provides sector group protect function to prevent program or erase operation in the protected sector group
- Provides chip unprotect function to allow code changing
- Provides temporary sector group unprotect function for code changing in previously protected sector groups
⢠Single Power Supply Operation
- 3.0 to 3.6 volt for read, erase, and program operations
⢠Latch-up protected to 100mA from -1V to 1.5xVcc
⢠Low Vcc write inhibit : Vcc <= VLKO
⢠Compatible with JEDEC standard
- Pinout and software compatible to single power supply Flash
PERFORMANCE
⢠High Performance
- Fast access time: 90ns
- Fast program time: 11us/word (typical)
- Fast erase time: 1s/sector (typical)
⢠Low Power Consumption
- Low active read current: 20mA (typical) at 5MHz
- Low standby current: 8uA (typical)
⢠Typical 100,000 erase/program cycle
⢠10 years data retention
SOFTWARE FEATURES
⢠Erase Suspend/ Erase Resume
- Suspends sector erase operation to read data from or program data to another sector which is not being erased
⢠Status Reply
- Data# Polling & Toggle bits provide detection of program and erase operation completion
⢠Support Common Flash Interface (CFI)
HARDWARE FEATURES
⢠Ready/Busy# (RY/BY#) Output
- Provides a hardware method of detecting program and erase operation completion
⢠Hardware Reset (RESET#) Input
- Provides a hardware method to reset the internal state machine to read mode
⢠WP#/ACC input pin
- Hardware write protect pin/Provides accelerated program capability
PACKAGE
⢠48-Pin TSOP
⢠56-Pin TSOP
⢠70-Pin SSOP
⢠All Pb-free devices are RoHS Compliant
P/N:PM1327
REV. 1.0, SEP. 22, 2008
1
|
▷ |