MX25V512 Datasheet, PDF (1/38 Pages) Macronix International – 512K-BIT [x 1] 2.5V CMOS SERIAL FLASH

MX25V512
512K-BIT [x 1] 2.5V CMOS SERIAL FLASH
FEATURES
GENERAL
• Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3
• 524,288 x 1 bit structure
• 16 Equal Sectors with 4K byte each
- Any Sector can be erased individually
• Single Power Supply Operation
- 2.35 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1V to Vcc +1V
• Low Vcc write inhibit is from 1.5V to 2.2V
PERFORMANCE
• High Performance
- Fast access time: 50MHz serial clock
- Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page)
- Fast erase time: 60ms(typ.) and 120ms(max.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/chip(512Kb)
• Low Power Consumption
- Low active read current: 8mA(max.) at 50MHz and 4mA(max.) at 25MHz
- Low active programming current: 15mA (max.)
- Low active erase current: 15mA (max.)
- Low standby current: 10uA (max.)
- Deep power-down mode 1uA (typical)
• Minimum 100,000 erase/program cycles
• 10 years of data retention
SOFTWARE FEATURES
• Input Data Format
- 1-byte Command code
• Block Lock protection
- The BP0~BP1 status bit defines the size of the area to be software protected against Program and Erase instructions.
• Auto Erase and Auto Program Algorithm
- Automatically erases and verifies data at selected sector
- Automatically programs and verifies data at selected page by an internal algorithm that automatically times the
program pulse widths (Any page to be programed should have page in the erased state first)
• Status Register Feature
• Electronic Identification
- JEDEC 2-byte Device ID
- RES command, 1-byte Device ID
P/N: PM1419
REV. 1.0, OCT. 28, 2008
1