English
Language : 

MX25L2026C Datasheet, PDF (1/41 Pages) Macronix International – 2M-BIT [x 1] CMOS SERIAL FLASH
MX25L2026C
FEATURES
2M-BIT [x 1] CMOS SERIAL FLASH
GENERAL
• Serial Peripheral Interface compatible -- Mode 0 and Mode 3
• 2,097,152 x 1 bit structure
• 64 Equal Sectors with 4K byte each
- Any Sector can be erased individually
• 4 Equal Blocks with 64K byte each
- Any Block can be erased individually
•Single Power Supply Operation
- 2.7 to 3.6 volt for read, erase, and program operations
•Latch-up protected to 100mA from -1V to Vcc +1V
PERFORMANCE
•High Performance
- Fast access time: 85MHz serial clock and 66MHz serial clock
- Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page)
- Fast erase time: 60ms(typ.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/block (64K-byte per block)
•Low Power Consumption
- Low active read current: 12mA(max.) at 85MHz, 8mA(max.) at 66MHz and 4mA(max.) at 33MHz
- Low active programming current: 15mA (max.)
- Low active erase current: 15mA (max.)
- Low standby current: 10uA (max.)
- Deep power-down mode 1uA (typical)
•Minimum 100,000 erase/program cycles
SOFTWARE FEATURES
•Input Data Format
- 1-byte Command code
• Block Lock protection
- The BP0~BP4 status bits define the size of the area to be software protected against Program and Erase
instructions
•Auto Erase and Auto Program Algorithm
- Automatically erases and verifies data at selected sector
- Automatically programs and verifies data at selected page by an internal algorithm that automatically times the
program pulse widths (Any page to be programed should have page in the erased state first)
• Status Register Feature
• Electronic Identification
- JEDEC 2-byte Device ID
- RES command, 1-byte Device ID
HARDWARE FEATURES
• SCLK Input
- Serial clock input
•SI Input
- Serial Data Input
•SO Output
- Serial Data Output
•WP# pin
- Hardware write protection
•HOLD# pin
- pause the chip without diselecting the chip
•PACKAGE
- 8-pin SOP (150mil)
- All Pb-free devices are RoHS Compliant
P/N: PM1476
REV. 1.1, JUL. 21, 2009
1