SMBJ5353B-TP Datasheet, PDF (3/5 Pages) Micro Commercial Components – 5 Watt Surface Mount Silicon Zener Diode 5.1 to 200 Volts

SMBJ5338B thru SMBJ5388B
MCC
369B
Marking Code Info.
MCC
TM
Micro Commercial Components
Cathode Band
Logo
Type No.
For Example: 339B for SMBJ5339B
369B for SMBJ5369B
Note 1 Devices listed have a ± 5% tolerance on nominal V Z.
Suffix C denotes a +_2%
Note 2
Nominal Zener Voltage (V Z) is read with the device in
standard test clips with 3/8 to ½ inch spacing between
clip and case of the diode. Before reading, the diode is
allowed so stabilize for a period of 40 ± 10 milliseconds
at 25°C (+8, -2°C).
Note 3
The Zener impedance (Z ZT or ZZK is derived from the 60
HZ ac voltage, which results when an ac current having
a rms value equal to 10% of the dc zener current (I ZT or
IZK) is superimposed on I ZT or IZK respectively.
Note 4
The Maximum Reverse (leakage) Current is specified
for devices with ± 20% and ± 10% voltage tolerances
on nominal VZ in another column.
Note 5
The Maximum Zener Current (I ZM) shown is for ± 5%
tolerance devices. I ZM for ± 10% and ± 20% devices
can be calculated using the formula:
IZM =
P
V ZM
Where “VZM” is VZ at the high end of the voltage
tolerance specified and “P” is the rated power of the
device.
Note 6
The Surge Current (I ZM) is specified as the maximum
peak of a nonrecurring sine wave of 8.3 milliseconds
duration.
Note 7 Voltage Regulation ( ∆VZ) is the difference between the
voltage measured at 10% and 50% I ZM).
Revision: I
www.mccsemi.com
3 of 5
2013/01/01