BCAP0310_13 Datasheet, PDF (3/5 Pages) Maxwell Technologies – BC SERIES ULTRACAPACITORS

DATASHEET BC SERIES ULTRACAPACITORS
ESR AND CAPACITANCE VS TEMPERATURE
180%
170%
Capacitance
DC ESR
160%
150%
140%
130%
120%
110%
100%
90%
80%
-60
-40
-20
0
20
40
60
80
Temperature (°C)
NOTES
1. Capacitance and ESR_DC measured at 25°C using
specified test current per waveform below.
2. Absolute maximum voltage, non-repeated. Not to
exceed 1 second.
3. After 72 hours at rated voltage. Initial leakage current
can be higher.
0.12V²
4. Per IEC 62391-2, P_d = _{ESRDC x mass}
V²
5. P_max = _{4 x ESRDC x mass}
6.
E_max =
½ CV²
3,600 x mass
7. E_stored = _{½ CV}²
3,600
8. ∆T=I_RMS2 x ESR x R_ca
9. Cycle using specified test current per waveform
below.
10. Cycle life varies depending upon application-specific
characteristics. Actual results will vary.
11. Per United Nations material classification UN3499, all
Maxwell ultracapacitors have less than 10 Wh capacity
to meet the requirements of Special Provisions
361. Both individual ultracapacitors and modules
composed of those ultracapacitors shipped by
Maxwell can be transported without being treated
as dangerous goods (hazardous materials) under
transportation regulations.
Page 3 Document number: 1017105.4 maxwell.com