BCAP0310 Datasheet, PDF (3/5 Pages) Maxwell Technologies – Round, radial mounting design for easy surface mount

D ATA S H E E T
BC SERIES ULTRACAPACITORS
BOOSTCAP^®
ULTRACAPACITOR
TYPICAL CHARACTERISTICS
THERMAL CHARACTERISTICS
Thermal Resistance (R_th, Case to
Ambient), typical²
Thermal Capacitance (C_th), typical ²
180%
170%
160%
150%
140%
130%
120%
110%
100%
90%
80%
-60
-40
-20
0
20
40
Temperature (°C)
BCAP0310
10.9^oC/W
60 J/^oC
Capacitance
DC ESR
60
80
BCAP0350
10.9^oC/W
60 J/^oC
NOTES
1. Capacitance and ESR_DC measured at 25°C per
Document Number 1007239 available at
www.maxwell.com.
2. Per Maxwell Document 1007239 available at
www.maxwell.com.
3. Maximum Peak current (1 sec) = ^{½ CV}
C x ESR_DC + 1
4. After 72 hours at 25°C and rated voltage. Initial
leakage current can be higher.
5.
Per IEC 62391-2, P_d =
0.12V²
ESR_DC x mass
6. P_max =
7. E_max =
V²
4 x ESR_DC x mass
½ CV²
3,600 x mass
8. E_stored = ½ CV²
9. Cycle per Document Number 10007239 available at
www.maxwell.com.
10. No more than 10% decrease in capacitance from
minimum initial capacitance or 50% increase in ESR
from maximum initial ESR.
11. Absolute maximum voltage non repeated, not to
exceed 1 second.
MOUNTING RECOMMENDATIONS
Do not reverse polarity. Please refer to document
number 1008238, available at maxwell.com for
soldering recommendations.
MARKINGS
Products are marked with the following information:
Rated capacitance, rated voltage, product number,
name of manufacturer, positive and negative terminal,
warning marking, serial number.
®
Page 3 Document number: 1017105.1 maxwell.com