|
9240LP Datasheet, PDF (1/18 Pages) Maxwell Technologies – 14-Bit, 10 MSPS Monolithic A/D Converter with LPT ASIC | |||
|
9240LP
14-Bit, 10 MSPS Monolithic A/D
Converter with LPT ASIC
NC
BIAS
CAPB
CAPT
NC
CML
LPTref
VinA
VinB
LPTDVDD
LPTAVDD
9240LP
LPTSTATUS
LPTBIT
BIT 3
BIT 4
BIT 5
BIT 6
BIT 7
BIT 8
BIT 9
BIT 10
BIT 11
BIT 12
BIT 13
AVDD
DVDD
DRVDD
VINA
VINB
VREF
CROW BAR
9240 14 Bit A/D
LPTAVDD
AVDD
LPTDVDD
DVDD
LPTDRVDD DRVDD
LPTVINA VINA
LPTVINB
LLPPTTVVRREEFF
VINB
VREF
9240LP BLOCK DIAGRAM
FEATURES:
⢠RAD-PAK® radiation-hardened against natural
⢠space radiation
⢠Low power dissipation: 295 mW
⢠Single 5 V supply
⢠Integral nonlinearity error: 2.5 LSB
⢠Differential nonlinearity error: 0.6 LSB
⢠Input referred noise: 0.36 LSB
⢠Complete: On-chip sample-and-hold amplifier and voltage
reference
⢠Signal-to-noise and distortion ration: 77.5 dB
⢠Spurious-free dynamic range: 90 dB
⢠Out-of-range indicator
⢠Straight binary output data
⢠Total dose hardened to 100 Krads (Si), dependent on orbit
and mission duration
⢠Single Event Latchup (SEL) protected
DESCRIPTION:
Maxwell Technologiesâ 9240LP is a 14-bit, analog-to-digital
converter that operates at a 10 MSPS rate. Manufactured with
a high speed CMOS process, this ADC contains an on-chip,
high performance, low noise, sample-and-hold amplifier and
programmable voltage reference.
The 9240LP offers single supply operation and dissipates only
295 mW with a 5 volt supply. This device provides no missing
codes and excellent temperature drift performance over the
full operating temperature range.
The 9240LP utilizes Maxwellâs LPT⢠Latchup Protection
Circuit.Maxwell Technologies' patented RAD-PAK® packaging
technology incorporates radiation shielding in the microcircuit
package. It eliminates the need for box shielding while provid-
ing the required radiation shielding for a lifetime in orbit or
space mission. In a GEO orbit, RAD-PAK® provides protection
to 100 krad (Si) radiation dose tolerance. This product is avail-
able with screening up to Maxwell Technologies self-defined
Class K.
(858) 503-3300- Fax: (858) 503-3301- www.maxwell.com
01.10.05 REV 6 All data sheets are subject to change without notice 1
©2005 Maxwell Technologies
All rights reserved.
|
▷ |