MAX14600 Datasheet, PDF (9/16 Pages) Maxim Integrated Products – USB Host Charger Identification/Adapter Emulators Greater User Flexibility

MAX14600–MAX14605
USB Host Charger Identification/Adapter Emulators
Pin Configurations
TOP VIEW
CB0 TDM TDP V_CC
8765
CB0 TDM TDP V_CC
8765
CB0 TDM TDP V_CC
8765
MAX14600
MAX14603
*EP
12
CEN DM
34
DP CB1
TDFN
*CONNECT EP TO GND.
MAX14601
MAX14604
*EP
12
CEN DM
34
DP CB1
TDFN
MAX14602
MAX14605
*EP
1 234
CEN DM DP I.C.
TDFN
MAX14600/
MAX14603
1
—
2
3
4
—
5
6
7
8
—
PIN
MAX14601/
MAX14604
—
1
2
3
4
—
5
6
7
8
—
Pin Descriptions
MAX14602/
MAX14605
1
—
2
3
—
4
5
6
7
8
—
NAME
FUNCTION
CEN
CEN
DM
DP
CB1
I.C.
V_CC
TDP
TDM
CB0
EP
Active-Low pMOSFET Open-Drain Output, Current-Limit Switch
(CLS) Control Output. When CB0 changes from V_IL to V_IH or V_IH to
V_IL, CEN is high.
nMOSFET Open-Drain Output, CLS Control Output. When CB0
changes from V_IL to V_IH or from V_IH to V_IL, CEN is low.
USB Connector D- Connection
USB Connector D+ Connection
Switch Control Bit. See Table 1.
Internally Connected. Do not externally connect.
Power Supply. Connect a 0.1FF capacitor between V_CC and
ground as close as possible to the device.
Host USB Transceiver D+ Connection
Host USB Transceiver D- Connection
Switch Control Bit. See Table 1.
Exposed Pad. Connect EP to ground. For enhanced thermal dissi-
pation, connect EP to a copper area as large as possible.
����������������������������������������������������������������� Maxim Integrated Products   9