DS1972 Datasheet, PDF (9/23 Pages) Maxim Integrated Products – 1024-Bit EEPROM iButton

Figure 7-1. Memory Function Flow Chart
Bus Master TX Memory
Function Command
0Fh
N
Write Scratch-
pad ?
Y
Bus Master TX
TA1 (T7:T0), TA2 (T15:T8)
DS1972 sets
Sets PF = 1
Clears AA = 0
Sets E2:E0 = T2:T0
Master TX Data Byte
To Scratchpad
DS1972
Increments
E2:E0
N
Master
Y
TX Reset ?
N
E2:E0
=7?
Y
N
T2:T0
=0?
Y
PF = 0
DS1972 TX CRC16
of Command, Address,
Data Bytes as they were
sent by the bus master
DS1972: 1024-Bit EEPROM iButton
From ROM Functions
Flow Chart (Figure 9)
To Figure 7
2^nd Part
Applies only if the
memory area is not
protected.
If write-protected, then
the DS1972 copies the
data byte from the tar-
get address into the SP.
If in EPROM mode,
then the DS1972 loads
the bitwise logical AND
of the transmitted byte
and the data byte from
the targeted address
into the SP.
Bus Master
N
Master
RX “1”s
TX Reset ?
Y
To ROM Functions
Flow Chart (Figure 9)
From Figure 7
2^nd Part
9 of 23