MAX13410E_09 Datasheet, PDF (8/24 Pages) Maxim Integrated Products – RS-485 Transceiver with Integrated Low-Dropout Regulator and AutoDirection Control

RS-485 Transceiver with Integrated Low-Dropout
Regulator and AutoDirection Control
SWITCHING CHARACTERISTICS–MAX13415E (continued)
(V_CC = +6.0V to +28V, T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at V_CC = +7.5V, C_S = 1µF, and T_A = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Driver Disable from Output Low
t_DLZ
S1 closed, Figure 4,
R_L = 500Ω, C_L = 15pF
RECEIVER
Receiver Propagation Delay
t_RPLH
t_RPHL
C_L = 15pF (at RO), Figures 5 and 6
Receiver Output Skew
t_RSKEW C_L = 15pF (at RO), Figures 5 and 6
Maximum Data Rate
f_MAX
16
Receiver Enable to Output High
t_RZH S2 closed, Figure 7, C_L = 15pF
Receiver Enable to Output Low
t_RZL
S1 closed, Figure 7, C_L = 15pF
Receiver Disable Time from Low
t_RLZ
S1 closed, Figure 7, C_L = 15pF
Receiver Disable Time from High
t_RZH S2 closed, Figure 7, C_L = 15pF
50
ns
75
ns
75
8
ns
Mbps
50
ns
50
ns
50
ns
50
ns
Note 2: C_S is the compensation capacitor on V_REG for the MAX13412E–MAX13415E versions. C_S must have an ESR value of 20mΩ or less.
Note 3: Parameters are guaranteed for +6.0V ≤ V_CC ≤ +28V.
(V_CC = +7.5V, T_A = +25°C, unless otherwise noted.)
Typical Operating Characteristics
SUPPLY CURRENT
vs. TEMPERATURE
8.0
NO LOAD
6.0
4.0
DE = HIGH
2.0
DE = LOW
0
-40 -15
10
35
60
85
TEMPERATURE (°C)
OUTPUT CURRENT
vs. RECEIVER OUTPUT HIGH VOLTAGE
35
30
25
20
15
10
5
0
0
1
2
3
4
5
OUTPUT HIGH VOLTAGE (V)
OUTPUT CURRENT
vs. RECEIVER OUTPUT LOW VOLTAGE
60
50
40
30
20
10
0
0
1
2
3
4
5
OUTPUT LOW VOLTAGE (V)
8 _______________________________________________________________________________________