MAX16910_12 Datasheet, PDF (6/15 Pages) Maxim Integrated Products – 200mA, Automotive, Ultra-Low Quiescent Current, Linear Regulator

200mA, Automotive, Ultra-Low
Quiescent Current, Linear Regulator
ELECTRICAL CHARACTERISTICS (continued)
(VIN = VENABLE = +14V, CTIMEOUT = open, CIN = 1μF, COUT = 4.7μF, unless otherwise noted. TA = -40°C to +125°C, TA P TJ P
+150°C, unless otherwise noted. Typical values are TA = +25°C.) (Note 2)
PARAMETER
SETOV INPUT (TRI-MODE)
SETOV Input Leakage Current
SETOV Low-Level Input Voltage
SETOV High-Level Input Voltage
SYMBOL
CONDITIONS
SET = HIGH, VSETOV = 5V
or SET = GND, VSETOV = 5V
VILSETOV
SET = GND, VSETOV < VILSETOV or places
device in +3.3V fixed output-voltage mode
VIHSETOV
SET = GND, VSETOV > VIHSETOV or places
device in +5V fixed output-voltage mode
MIN
VOUT
- 0.4
TYP
1
MAX UNITS
FA
0.4
V
V
Note 2: P roduction tested at T_A = +25°C. Overtemperature limits are guaranteed by ATE characterization between -40°C P T_J ≤
+150°C, unless otherwise noted.
Note 3: Observe the absolute maximum power dissipation limits.
Note 4: Specification characterized up to +150°C operating junction temperature. Limits are guaranteed by bench characterization.
Note 5: Dropout voltage is defined as (VIN - VOUT) when VOUT is 2% below the value of VOUT for VIN = VOUT + 3V.
Note 6: Not production tested.
Note 7: ENABLE is internally pulled to GND.
6  _______________________________________________________________________________________