MAX11811_1009 Datasheet, PDF (6/23 Pages) Maxim Integrated Products – Touch Evaluation System (TEVS)

MAX11811 Touch Evaluation System (TEVS)
USB
INTERFACE
TO HOST
PC
MAX11811
USB INTERFACE
BOARD
(UTIBB+)
I²C
IRQ
1.8V TO
3.6V/GND
HAPTIC
MOTOR
Y+
MAX11811
EV KIT+
X+
4-WIRE
RESISTIVE
Y-
TOUCH SCREEN
X-
FPC
CONNECTOR
Figure 2. MAX11811 Touch Evaluation System (TEVS) Block Diagram
Quick Start
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and under-
lined refers to items from the Windows operating system.
Procedure (TEVS Software and
USB Driver Installation)
1) Before plugging the TEVS into an available port on
a Windows XP or Windows 7 PC, the TEVS software
must be installed.
2) Ensure that the jumpers on the UTIBB+ board are in
the following positions:
J8: 2-3
J9: 2-3
J19: 1-2
3) The software comes with the USB driver and a GUI
application. Unzip the files and save the contents in
an easily accessible location.
4) Locate the Setup.exe file and double-click on it, then
follow the instructions for installation.
5) The driver for the EV kit is installed in the following
location:
C:\MAXIM TSC USB DRIVER CDM20602
6) The application along with its supporting files is
located at:
C:\Program Files\Maxim Integrated Products\
MAX118xx EVS <version>
7) A shortcut to the application executable file is
created on the desktop and in the Start | Programs
menu.
8) To uninstall the software, go to My Computer | Add
or Remove program.
6   _______________________________________________________________________________________