MAX16836 Datasheet, PDF (5/11 Pages) Maxim Integrated Products – High-Voltage, 350mA, High-Brightness LED Driver with PWM Dimming and 5V Regulator

High-Voltage, 350mA, High-Brightness LED
Driver with PWM Dimming and 5V Regulator
Typical Operating Characteristics (continued)
(V_IN = V_EN = +12V, T_A = +25°C, unless otherwise noted.)
200Hz DIMMED OPERATION (EXPANDED)
MAX16836 toc11
I_LOAD = 350mA
V_IN = V_EN = 12V
DIM PULSED AT
200Hz (50%
DUTY CYCLE)
V_DIM
2V/div
0V
I_LOAD
200mA/div
0A
20μs/div
VSENSE vs. VCS-
206
ILOAD = 350mA
204
202
200
198
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
VCS- (V)
PIN
1, 16
2, 3
4–8, 14
9
10
11
12
13
15
—
NAME
OUT
IN
N.C.
CS+
CS-
V5
GND
DIM
EN
EP
Pin Description
FUNCTION
Current-Regulated Output. Connect pin 1 to pin 16.
Positive Input Supply. Bypass IN with a 0.1µF (min) capacitor to GND. Connect pin 2 to pin 3.
No Connection. Not internally connected.
Positive Input of the Internal Differential Amplifier. Connect the current-sense resistor between CS+
and CS- to program the output current level.
Negative Input of the Internal Differential Amplifier. Connect the current-sense resistor between
CS- and CS+ to program the output current level.
+5V Regulated Output. Connect a 0.1µF capacitor from V5 to GND.
Ground
Pulsed Dimming Input. Drive DIM low to disable the output. Drive DIM high or leave unconnected
to enable the output.
Enable Input. Drive EN high to enable the output.
Exposed Pad. Connect to the ground plane for effective power dissipation. Do not use as the only
ground connection.
_______________________________________________________________________________________ 5