English
Language : 

MAX14954 Datasheet, PDF (5/17 Pages) Maxim Integrated Products – Computer on Modules
MAX14954
Ruggedized Quad PCIe Redriver with
Equalization and Extended Temperature Operation
Electrical Characteristics (continued)
(VCC = +3.0V to +3.6V, CCL = 200nF coupling capacitor on each output, RL = 50Ω on each output, TA = -40°C to +85°C, unless oth-
erwise noted. Typical values are at VCC = +3.3V and TA = +25°C.) (Note 3)
PARAMETER
Input Equalization, 16dB
AC PERFORMANCE (Note 4)
Output Common-Mode Voltage
Swing Peak-to-Peak
Propagation Delay
Rise/Fall Time
Rise/Fall Time Mismatch
Deterministic Jitter
Random Jitter
SYMBOL
VRX-EQ-
16dB
CONDITIONS
INEQ1 = VCC, INEQ0 = VCC (Note 5)
VTX-CM-
AC-PP
tPD
tTX-RISE-
FALL
tTX-RF-
MISMATCH
tTX-DJ-DD
Max(VOUT_P + VOUT_N)/2 -
Min(VOUT_P + VOUT_N)/2
(Note 6)
(Note 6)
K28.5 pattern, AC-coupled, RL = 50Ω,
data rate = 8GT/s
tTX-RJ-DD
D10.2 pattern, no deemphasis, no
preshoot, data rate = 8GT/s
MIN TYP MAX UNITS
16
dB
100 mVP-P
120
160
240
ps
20
ps
5
ps
10.5
0.5
23.5 psP-P
1.5 psRMS
Electrical Idle Entry Delay
tTX-IDLE-
SET-TO-
IDLE
From input to output, D10.2 pattern,
data rate = 1GT/s
5
8
ns
Electrical Idle Exit Delay
tTX-IDLE-
TO-DIFF-
DATA
From input to output, D10.2 pattern,
data rate = 1GT/s
5
8
ns
Electrical Idle Detect Threshold
VTX-IDLE-
THRESH
D10.2 pattern, data rate = 1GT/s,
(Note 3)
D10.2 pattern, data rate = 1GT/s to 8GT/s
65
112
175
mVP-P
112
Output Voltage During Electrical
Idle (AC)
Receiver Detection Pulse
Amplitude
Receiver Detection Pulse Width
Receiver Detection Retry Period
VTX-IDLE-
DIFF-AC-P
VTX-RCV-
DETECT
|(VOUT_P - VOUT_N)|
Voltage change in positive direction
20
mVP-P
600
mV
150
ns
300
ns
CONTROL LOGIC
Input Logic-Level Low
Input Logic-Level High
Input Logic Hysteresis
Input Pulldown Resistance
ESD PROTECTION
ESD Voltage
VIL
VIH
VHYST
RPD
Human Body Model
0.6
V
1.4
V
0.1
V
200 250
kΩ
±5
kV
Note 3: All units are 100% production tested at TA = +85°C. Specifications for all temperature limits are guaranteed by design.
Note 4: Guaranteed by design, unless otherwise noted.
Note 5: Equivalent to same amount of deemphasis driving the input.
Note 6: Rise and fall times are measured using 20% and 80% levels.
www.maximintegrated.com
Maxim Integrated │  5