MAX14531E Datasheet, PDF (5/5 Pages) Maxim Integrated Products – USB 2.0 Hi-Speed and Audio Switches with Negative Signal Capability and ±15kV ESD

USB 2.0 Hi-Speed and Audio Switches with
Negative Signal Capability and ±15kV ESD
Layout
USB Hi-Speed requires careful PCB layout with 45Ω
single-ended/90Ω differential controlled impedance
matched traces of equal lengths. Ensure that bypass
capacitors are as close as possible to the device. Use
large ground planes where possible.
Power-Supply Sequencing
Caution: Do not exceed the absolute maximum rat-
ings because stresses beyond the listed ratings
may cause permanent damage to the device.
Proper power-supply sequencing is recommended for
all devices. Apply V_CC before applying analog signals,
especially if the analog signal is not current limited.
PROCESS: BiCMOS
Chip Information
Package Information
For the latest package outline information and land patterns, go
to www.maxim-ic.com/packages.
PACKAGE TYPE PACKAGE CODE DOCUMENT NO.
12 WLP
W121A2-1
21-0009
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________ 5
© 2009 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.