MAX7036_10 Datasheet, PDF (4/13 Pages) Maxim Integrated Products – 300MHz to 450MHz ASK Receiver with Internal IF Filter

300MHz to 450MHz ASK Receiver
with Internal IF Filter
AC ELECTRICAL CHARACTERISTICS (continued)
(Typical Application Circuit, 50Ω system impedance, V_AVDD = V_DVDD = V_DD = 3.0V to 3.6V, f_RF = 300MHz to 450MHz, T_A = -40°C to
+105°C, unless otherwise noted. Typical values are at V_AVDD = V_DVDD = V_DD = 3.3V, T_A = +25°C, f_RF = 315MHz, unless otherwise
noted.) (100% tested at T_A = +105°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
LNA/MIXER
LNA Input Impedance
Z_INLNA Normalized to 50Ω
f_RF = 315MHz
f_RF = 433MHz
0.4 -
j5.6
Ω
0.4 -
j4.0
LO Signal Feedthrough to
Antenna
Voltage Gain Reduction
LNA/Mixer Voltage Gain
Low-gain mode, AGC enabled
High-gain LNA mode
Low-gain LNA mode
-75
dBm
29
dB
55
dB
26
3dB Cutoff Frequency
RSSI Linearity
RSSI Dynamic Range
RSSI Level
Intermediate Frequency
Maximum Data-Filter Bandwidth
Maximum Data-Slicer Bandwidth
Maximum Peak Detector
Bandwidth
Maximum Data Rate
Crystal Frequency
Crystal Load Capacitance
BW_IF
Set by capacitors on IFC1 and IFC2 (see
the Typical Application Circuit)
f_IF
BW_DF
BW_DS
Includes AGC
P_RFIN < -120dBm
P_RFIN > 0dBm, AGC enabled
f_XTAL
C_LOAD
Manchester coded
Nonreturn to zero (NRZ)
400
kHz
±0.5
dB
80
dB
1.34
V
2.35
200
kHz
50
kHz
100
kHz
50
kHz
33
kbps
66
9.36
14.06 MHz
10
pF
Note 2: BER = 2 x 10^-3, Manchester coded, data rate = 4kbps. IF bandwidth = 400kHz.
4 _______________________________________________________________________________________