MAX13050 Datasheet, PDF (4/20 Pages) Maxim Integrated Products – Industry-Standard High-Speed CAN Transceivers with ±80V Fault Protection

Industry-Standard High-Speed CAN
Transceivers with ±80V Fault Protection
DC ELECTRICAL CHARACTERISTICS (continued)
(V_CC = +5V ±5%, V_CC2 = +3V to +3.6V, T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at V_CC = +5V, V_CC2 = +3.3V,
R_L = 60Ω, and T_A = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Input Voltage for Standby
V_IH__RS
0.75 x
V
V_CC
Slope-Control Mode Voltage
High-Speed Mode Current
ESD Protection
V_SLOPE -200µA < I_RS < 10µA
0.4 x
V_CC
0.6 x
V
V_CC
I_{IL_RS} V_RS = 0
-500
µA
IEC 61000-4-2 Contact Discharge Method
±8
kV
per IBEE test facility (Note 3)
TIMING CHARACTERISTICS
(V_CC = +5V ±5%, V_CC2 = +3V to +3.6V, R_L = 60Ω, C_L = 100pF, T_A = T_MIN to T_MAX, unless otherwise noted. Typical values are at
V_CC = +5V, V_CC2 = +3.3V, and T_A = +25°C.)
PARAMETER
Delay TXD to Bus Active
Delay TXD to Bus Inactive
Delay Bus to Receiver Active
Delay Bus to Receiver Inactive
Delay TXD to RXD Active
(Dominant Loop Delay)
SYMBOL
t_ONTXD
t_OFFTXD
t_ONRXD
t_OFFRXD
CONDITIONS
Figure 1 (Note 4)
Figure 1
(Note 4)
MAX13050/MAX13052/
MAX13053
MAX13054
Figure 1 (Note 4)
Figure 1 (Note 4)
t_ONLOOP Figure 1 (Note 4)
MIN TYP MAX UNITS
66
110
ns
61
95
ns
70
110
54
115
ns
46
160
ns
121 255
ns
Delay TXD to RXD Inactive
(Recessive Loop Delay)
T_OFFLOOP Figure 4 (Note 4)
108 255
ns
Delay TXD to RXD Active
(Dominant Loop Delay) Slew-Rate
Controlled
t_ONLOOP-S MAX13052
R_RS = 24kΩ
(500kbps)
R_RS = 100kΩ
(125kbps)
R_RS = 180kΩ
(62.5kbps)
280 450
ns
0.82
1.6
µs
1.37
5
R_RS = 24kΩ
(500kbps)
386 600
ns
Delay TXD to RXD Inactive (Loop
Delay) Slew-Rate Controlled
t_OFFLOOP-S MAX13052
R_RS = 100kΩ
(125kbps)
R_RS = 180kΩ
(62.5kbps)
0.74
1.6
µs
0.97
5
R_RS = 24kΩ
10
(500kbps)
Differential Output Slew Rate
|SR| MAX13052
R_RS = 100kΩ
(125kbps)
2.7
V/µs
R_RS = 180kΩ
1.6
(62.5kbps)
4 _______________________________________________________________________________________