MAX13030E Datasheet, PDF (4/18 Pages) Maxim Integrated Products – 6-Channel High-Speed Logic-Level Translators

6-Channel High-Speed Logic-Level Translators
ELECTRICAL CHARACTERISTICS (continued)
(V_CC = +2.2V to +3.6V, V_L = +1.62V to +3.2V, EN = V_L, T_A = -40°C to +85°C, unless otherwise noted. Typical values are at V_CC =
+3.3V, V_L = 1.8V and T_A = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
I/O V_{CC_}, CLK_V_CC Output-
Voltage Low
V_OLC
I/O V_{CC_}, CLK_V_CC sink current = 20µA,
I/O V_L_ ≤ 0.15V
1/3
V
V_CC
RISE/FALL TIME ACCELERATOR STAGE (Note 3)
Accelerator Pulse Duration
On falling edge
On rising edge
3
ns
3
V_L-Output-Accelerator Source
Impedance
V_CC-Output-Accelerator Source
Impedance
V_L-Output-Accelerator Sink
Impedance
V_CC-Output-Accelerator Sink
Impedance
V_L = 1.62V
V_L = 3.2V
V_CC = 2.2V
V_CC = 3.6V
V_L = 1.62V
V_L = 3.2V
V_CC = 2.2V
V_CC = 3.6V
11
Ω
6
9
Ω
8
9
Ω
8
10
Ω
9
TIMING CHARACTERISTICS
(V_CC = +2.2V to +3.6V, V_L = +1.62V to +3.2V, C_I/OVL ≤ 15pF, C_I/OVCC ≤ 15pF, R_SOURCE = 150Ω, EN = V_L, I/O V_{L_} to I/O V_{CC_}
rise/fall time = 3ns, T_A = -40°C to +85°C, unless otherwise noted. Typical values are at V_CC = +3.3V, V_L = 1.8V and T_A = +25°C.)
(Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
I/O V_CC_, CLK_V_CC Rise Time
t_RVCC
R_S = 150Ω, C_I/OVCC = 10pF, C_{CLK_VCC} =
10pF, push-pull drivers (Figure 1)
2.5
ns
I/O V_CC_, CLK_V_CC Fall Time
t_FVCC
R_S = 150Ω, C_I/OVCC = 10pF, C_{CLK_VCC} =
10pF (Figures 1, 2)
2.5
ns
I/O V_L_, CLK_V_L Rise Time
t_RVL
R_S = 150Ω, C_I/OVL = 15pF, C_{CLK_VL} = 15pF,
push-pull drivers (Figure 3)
2.5
ns
I/O V_L_, CLK_V_L Fall Time
t_FVL
R_S = 150Ω, C_I/OVL = 15pF, C_{CLK_VL} = 15pF
(Figures 3, 4)
2.5
ns
Propagation Delay
(Driving I/O V_L_, CLK_V_L)
Propagation Delay
(Driving I/O V_CC_, CLK_V_CC)
Channel-to-Channel Skew
Propagation Delay from
I/O V_{L_} to I/O V_{CC_} after EN
t_PVL-VCC
t_PVCC-VL
t_SKEW
t_EN-VCC
R_S = 150Ω, C_I/OVCC = 10pF, C_{CLK_VCC} =
10pF, push-pull drivers (Figure 1)
R_S = 150Ω, C_I/OVL = 15pF, C_{CLK_VL} = 15pF,
push-pull drivers (Figure 3)
R_S = 150Ω, C_I/OVCC = 10pF, C_I/OVL = 15pF
R_LOAD = 1MΩ, C_I/OVCC = 10pF (Figure 5)
(MAX13030E–MAX13034E)
6.5
ns
6.5
ns
0.8
ns
5
µs
4 _______________________________________________________________________________________