MAX1170 Datasheet, PDF (4/12 Pages) Maxim Integrated Products – 12-Bit, 10Msps, TTL-Output ADC

12-Bit, 10Msps, TTL-Output ADC
ELECTRICAL CHARACTERISTICS (continued)
(VCC = +5.0V, VEE = -5.2V, DVCC = +5.0V, VIN = ±2.0V, VSB = -2.0V, VST = +2.0V, fCLK = 10MHz, 50% clock duty cycle,
TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
CONDITIONS
POWER-SUPPLY REQUIREMENTS
VCC
Voltages
DVCC
-VEE
ICC, TA = +25°C
Currents
DICC, TA = TMIN to TMAX
-IEE, TA = +25°C
Power Dissipation
Power-Supply Rejection
5V ±0.25V, -5.2V ±0.25V
TEST
LEVEL
IV
IV
IV
I
IV
I
VI
V
MIN
4.75
4.75
-4.95
TYP
5.0
5.0
-5.2
135
40
45
1.1
1.0
MAX UNITS
5.25
5.25
V
-5.45
150
55
mA
70
1.3
W
LSB
Note 1: Typical thermal impedances (unsoldered, in free air):
32 Ceramic SB: θj_A = 50°C/W
44 CERQUAD: θj_A = 78°C/W, θj_A at 1m/s airflow = 58°C/W, θj_C = 3.3°C/W
Use forced-air cooling or heatsinking to maintain Tj ≤ 150°C.
TEST LEVEL CODES
All electrical characteristics are subject to the
following conditions:
All parameters having min/max specifications
are guaranteed. The Test Level column indi-
cates the specific device testing actually per-
formed during production and Quality
Assurance inspection. Any blank section in the
data column indicates that the specification is
not tested at the specified condition.
Unless otherwise noted, all tests are pulsed;
therefore, T_j = T_C = T_A.
TEST LEVEL
I
II
III
IV
V
VI
TEST PROCEDURE
100% production tested at the specified temperature.
100% production tested at TA = +25°C, and sample tested at the
specified temperatures.
QA sample tested only at the specified temperatures.
Parameter is guaranteed (but not tested) by design and charac-
terization data.
Parameter is a typical value for information purposes only.
100% production tested at TA = +25°C. Parameter is guaranteed
over specified temperature range.
4 _______________________________________________________________________________________