DS1402D-0XX Datasheet, PDF (4/6 Pages) Maxim Integrated Products – iButton Probe Component Parts

DS1402D
Assembly Instructions
1. Insert the end of the Data Spring (B) wire at the large coil end, into the slot at the top of the Data Button (A).
Twist the spring clockwise into the slot until the end of the wire at the small coil end lines up with the edge of the
slot in the Button.
A
B
2. Place the Data Button (A) with the Data Spring (B), assembled, into the Contact Support (C).
D
The Contact (D) loop
fits around the side of
the notch with the
larger radii.
4 of 6