MAX14653EVKIT Datasheet, PDF (3/7 Pages) Maxim Integrated Products – Proven PCB Layout

MAX14653–MAX14655 Evaluation Kits
Evaluate:
MAX14653–MAX14655
ACOK Indicator LED
Each EV kit features a peripheral circuit that gives visual
indication of no fault at V_IN. Simply install the shunt on
jumper J2 to connect the peripheral circuit to the ACOK
output of the device. See Table 1 for jumper settings.
OVP Threshold
Each EV kit features a jumper to change the overvoltage
threshold of the device between preset threshold mode
and adjustable threshold mode, in which the threshold is
set by an external resistor-divider connected at OVLO.
To use the device in preset threshold mode, simply
connect a shunt across pins 2-3 on jumper J1. For adjust-
able threshold mode, connect a shunt across pins 1-2 on
J1. Refer to the MAX14653/MAX14654/MAX14655 IC
data sheet for information on how to set the adjustable
threshold using resistors R1 and R2. See Table 1 for
jumper settings.
Table 1. Jumper Settings (J1, J2)
JUMPER
J1
J2
*Default position.
SHUNT POSITION
1-2
2-3*
1-2*
Not installed
DESCRIPTION
Adjustable external OVLO threshold
Preset internal OVLO threshold
Connects the LED peripheral circuit to the ACOK output of the device
Disconnects the LED peripheral circuit to the ACOK output of the device
www.maximintegrated.com
Maxim Integrated │  3