MAX1168EVKIT Datasheet, PDF (3/11 Pages) Maxim Integrated Products – MAX1168 Evaluation Kit/Evaluation System

MAX1168 Evaluation Kit/Evaluation System
Table 1. Software Control Descriptions
CONTROL
DESCRIPTION
The View menu makes the COM port debug form visible
The BlockSample menu is an EV kit software feature that allows a single channel to be sampled and
stored. The data block length is selectable and the data can be saved to a file. Block sampling is limited
to single-channel read modes only. SCAN[1:0] = 01 or 11 modes are not supported. For multiple-channel
reads, use the Read ADC button or the AutoRead checkbox.
The Device menu allows the user to evaluate either the MAX1168 or MAX1068
The Help menu allows the user to view the help file or the software’s about box
The Control Byte label shows the current control byte setting in hexadecimal
The CS[2:0] combobox selects the channel below:
000 CS2 CS1 CS0 = Channel 0
001 CS2 CS1 CS0 = Channel 1
010 CS2 CS1 CS0 = Channel 2
011 CS2 CS1 CS0 = Channel 3
100 CS2 CS1 CS0 = Channel 4
101 CS2 CS1 CS0 = Channel 5
110 CS2 CS1 CS0 = Channel 6
111 CS2 CS1 CS0 = Channel 7
The SCAN[1:0] combobox selects the scan mode below:
00 SCAN1 SCAN0 = Single channel, no scan
01 SCAN1 SCAN0 = Sequentially scans channel 0 to CS[2:0]
10 SCAN1 SCAN0 = Sequentially scans channel 4 to CS[2:0]; CS[2:0] ≥ 4
11 SCAN1 SCAN0 = Scan channel CS[2:0] eight times
The SEL[1:0] combobox selects the reference mode below:
00 SEL1 SEL0 = Internal reference mode
01 SEL1 SEL0 = EV kit software does not support this mode
10 SEL1 SEL0 = EV kit software does not support this mode
11 SEL1 SEL0 = External reference mode
The CLK combobox selects the clock mode below:
0 EXT CLK
1 INT CLK
The SPI SCLK Frequency combobox selections are:
02: 4.19MHz
04: 2.10MHz
.
.
.
FF: 33kHz
_______________________________________________________________________________________ 3