MAX8819A Datasheet, PDF (29/29 Pages) Maxim Integrated Products – PMIC with Integrated Chargers and Smart Power Selector in a 4mm x 4mm TQFN

PMIC with Integrated Chargers and Smart
Power Selector in a 4mm x 4mm TQFN
constant is R x C = 100µs, and the output voltage
decays to within 1% of final value in about 500µs.
PCB Layout and Routing
Good printed circuit board (PCB) layout is necessary to
achieve optimal performance. Refer to the MAX8819A
Evaluation Kit for Maxim’s recommended layout.
Use the following guidelines for the best results:
• The LX_ rapidly switches between PV_ and PG_.
Minimize stray capacitance on LX_ to maintain high
efficiency.
• Keep the FB_ node away from noise sources such
as the inductor.
• The exposed pad (EP) is the main path for heat to
exit the IC. Connect EP to the ground plane with
thermal vias to allow heat to dissipate from the
device.
• Use short and wide traces for high-current and dis-
continuous current paths.
• The step-down converter power inputs are critical
discontinuous current paths that require careful
bypassing. Place the step-down converter input
bypass capacitor as close as possible to the PV_
and PG_ pins.
• Minimize the area of the loops formed by the step-
down converters’ dynamic switching currents.
Package Marking
The top of the MAX8819_ package is laser etched as
shown in Figure 11:
“8819_ETI” is the product identification code. The full
part number is MAX8819_ETI; however, in this case, the
“MAX” prefix is omitted due to space limitations. The “_”
corresponds to the “A” or “B” version.
“yww” is a date code. “y” is the last number in the
Gregorian calendar year. “ww” is the week number in
the Gregorian calendar. For example:
• “801” is the first week of 2008; the week of
January 1st, 2008.
• “052” is the fifty-second week of 2010; the week of
December 27th, 2010.
• “aaaa” is an assembly code and lot code.
• “+” denotes lead-free packaging and marks the
pin 1 location.
8819_ETI
TIyww
+ aaaa
Figure 11. Package Marking Example
Pin Configuration
TOP VIEW
21 20 19 18 17 16 15
FB2 22
FB3 23
EN123 24
PV2 25
LX2 26
PG2 27
MAX8819A
MAX8819B
MAX8819C
DLIM2 28 _{EXPOSED PAD (EP)}
+
1 234567
14 CISET
13 FB1
12 CEN
11 DC
10 SYS
9 BAT
8 RST1
PROCESS: S45T
Chip Information
Package Information
For the latest package outline information and land patterns, go
to www.maxim-ic.com/packages.
PACKAGE TYPE PACKAGE CODE DOCUMENT NO.
28 TQFN-EP
T2844+1
21-0139
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 29
© 2009 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.