DS26519 Datasheet, PDF (253/310 Pages) Maxim Integrated Products – 16-Port T1/E1/J1 Transceiver

DS26519 16-Port T1/E1/J1 Transceiver
Register Name:
Register Description:
Register Address:
LMCR
LIU Maintenance Control Register
1002h + (20h x (n - 1)) + (2000h x [(n - 1) / 8]): where n = 1 to 16
Bit #
7
6
5
4
3
2
1
0
Name
TAIS
ATAIS
LB2
LB1
LB0
TPDE
RPDE
TE
Default
0
0
0
0
0
0
0
0
Bit 7: Manual Transmit AIS (TAIS). Alarm Indication Signal (AIS) is sent using MCLK as the reference clock. The
transmit data coming from the framer is ignored.
0 = TAIS is disabled.
1 = Output an unframed all-ones pattern (AIS) at TTIPn and TRINGn.
Bit : Automatic Transmit AIS (ATAIS)
0 = ATAIS is disabled.
1 = Automatically transmit AIS on the occurrence of an LIU LOS.
Bits 5 to 3: Loopback Selection (LB[2:0]. See Figure 9-27 for more details on each loopback.
LB2 LB1 LB0
Loopback Selection
0
0
0 No loopback selected
0
0
1 Remote Loopback 2 (includes jitter attenuator)
0
1
0 Analog Loopback
0
1
1 Remote Loopback 1 (no jitter attenuator)
1
0
0 Local Loopback (includes jitter attenuator)
1
0
1
Dual Loopback—Remote Loopback 1 and Local Loopback (jitter
attenuator is included in Local Loopback)
1
1
0 Reserved
1
1
1 Reserved
Bit 2: Transmit Power-Down Enable (TPDE)
0 = Transmitter power enabled.
1 = Transmitter powered down. TTIPn/TRINGn outputs are high impedance.
Bit 1: Receiver Power-Down Enable (RPDE)
0 = Receiver power enabled.
1 = Receiver powered down.
Bit 0: Transmit Enable (TE). This function is overridden by the TXENABLE pin.
0 = TTIPn/TRINGn outputs are high impedance.
1 = TTIPn/TRINGn outputs enabled.
253 of 310