DS2482-800_12 Datasheet, PDF (23/23 Pages) Maxim Integrated Products – 8-Channel 1-Wire Master

DS2482-800: 8-Channel 1-Wire Master
REVISION HISTORY
REVISION
DATE
6/04
11/04
8/08
DESCRIPTION
Initial release
EC table changes (PU_SRC and t_F1)
Upper I²C slave address bits changed from 0110b to 0011b
Removed the 1-Wire line termination resistor and references to it from the
Typical Operating Circuit and Figure 11. Deleted I²C trademark note; added
package information section.
Conversion to lead (Pb) free product.
11/09
Removed the presence pulse masking feature.
12/11
Revised the recommendation on the use of active pullup.
Updated the Soldering Information.
Added a note to Strong Pullup (SPU) description.
Updated the 1-Wire Reset command description, sections Restriction and
Configuration Bits Affected.
Added the Land Pattern column to Package Information section.
PAGES
CHANGED
—
2
16
1, 21, 22
1
1, 3, 4, 5, 6,
7, 9, 10, 11,
12
6
2
7
12
22
23 of 23
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim
reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2012 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.