MAX1452_09 Datasheet, PDF (21/25 Pages) Maxim Integrated Products – Low-Cost Precision Sensor Signal Conditioner

Low-Cost Precision Sensor
Signal Conditioner
Table 13. IRSP Decode
IRSP[3:0]
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010-1111
RETURNED VALUE
DHR[7:0]
DHR[15:8]
IEEA[7:4], ICRA[3:0] concatenated
CRIL[3:0], IRSP[3:0] concatenated
ALOC[3:0], ATIM[3:0] concatenated
IEEA[7:0] EEPROM address byte
IEED[7:0] EEPROM data byte
TEMP-Index[7:0]
BitClock[7:0]
Reserved. Internal flash test data.
11001010 (CAhex). This can be used to test communication.
Table 14. ATIM Definition
ATIM[3:0]
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
DURATION OF ANALOG SIGNAL SPECIFIED IN BYTE TIMES (8-BIT TIME)
2⁰ + 1 = 2 byte times i.e. (2 ✕ 8)/baud rate
2¹ + 1 = 3 byte times
2² + 1 = 5 byte times
2³ + 1 = 9 byte times
2⁴ + 1 = 17 byte times
2⁵ + 1 = 33 byte times
2⁶ + 1 = 65 byte times
2⁷ + 1 = 129 byte times
2⁸ + 1 = 257 byte times
2⁹ + 1 = 513 byte times
2¹⁰ + 1 = 1025 byte times
2¹¹ + 1 = 2049 byte times
2¹² + 1 = 4097 byte times
2¹³ + 1 = 8193 byte times
2¹⁴ + 1 = 16,385 byte times
In this mode OUT is continuous, however DIO accepts commands after 32,769 byte times. Do not parallel
connect DIO to OUT.
______________________________________________________________________________________ 21