MAX9171_07 Datasheet, PDF (2/12 Pages) Maxim Integrated Products – Single/Dual LVDS Line Receivers with “In-Path” Fail-Safe

Single/Dual LVDS Line Receivers with
“In-Path” Fail-Safe
ABSOLUTE MAXIMUM RATINGS
V_CC to GND ...........................................................-0.3V to +4.0V
IN_+, IN_- to GND .................................................-0.3V to +4.0V
OUT_ to GND ............................................-0.3V to (V_CC + 0.3V)
Continuous Power Dissipation (T_A = +70°C)
8-Pin SOT23 (derate 8.9mW/°C above +70°C) ...........714mW
8-Pin SO (derate 5.9mW/°C above +70°C) .................471mW
8-Pin TDFN (derate 24.4mW/°C above +70°C) ........1951mW
Operating Temperature Range ..........................-40°C to +85°C
Junction Temperature .....................................................+150°C
Storage Temperature Range ............................-65°C to +150°C
ESD Protection
Human Body Model (IN_+, IN_-) ...................................±13kV
Lead Temperature (soldering, 10s) ................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V_CC = 3.0V to 3.6V, differential input voltage |V_ID| = 0.1V to 1.2V, receiver input voltage = 0 to V_CC, common-mode voltage V_CM =
|V_ID/2| to (V_CC - |V_ID/2|), T_A = -40°C to +85°C, unless otherwise noted. Typical values are at V_CC = 3.3V, |V_ID| = 0.2V, V_CM = 1.2V,
T_A = +25°C.) (Notes 1, 2)
PARAMETER
LVDS INPUTS (IN_+, IN_-)
Differential Input High Threshold
Differential Input Low Threshold
Input Current (Noninverting Input)
Power-Off Input Current
(Noninverting Input)
SYMBOL
CONDITIONS
V_TH
V_TL
I_IN+
I_IN+OFF
Figure 1
Figure 1
Figure 1
V_IN+ = 0 to 3.6V, V_IN- = 0 to 3.6V, V_CC = 0
or open (Figure 1)
MIN TYP MAX UNITS
-40
0
mV
-100 -40
mV
+0.5 -2.1 -5.0
µA
-0.5
0
+0.5
µA
Input Current (Inverting Input)
Power-Off Input Current
(Inverting Input)
I_IN-
I_IN-OFF
Figure 1
V_IN+ = 0 to 3.6V, V_IN- = 0 to 3.6V, V_CC = 0
or open (Figure 1)
-0.5 +4.4 +10.0
µA
-0.5
0
+0.5
µA
LVCMOS/LVTTL OUTPUTS (OUT_)
Output High Voltage
Output Low Voltage
Open, undriven short, or
2.7
3.2
V_OH I_OH = -4.0mA ^{undriven parallel termination}
V
V_ID = 0V
2.7
3.2
V_OL I_OL = 4.0mA, V_ID = -100mV
0.1
0.4
V
Output Short-Circuit Current
I_OS
V_{OUT_} = 0 (Note 3)
-45
-77 -120
mA
POWER SUPPLY
Supply Current
MAX9171
I_CC
Inputs open
MAX9172
3.6
6
mA
7.0
9
2 _______________________________________________________________________________________