MAX6101EUR Datasheet, PDF (2/8 Pages) Maxim Integrated Products – PLASTIC ENCAPSULATED DEVICES

Conclusion
The MAX6101 successfully meets the quality and reliability standards required of all Maxim products. In addition,
Maxim’s continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim’s quality
and reliability standards.
Table of Contents
I. ........Device Description
II. ........Manufacturing Information
III. .......Packaging Information
V. ........Quality Assurance Information
VI. .......Reliability Evaluation
IV. .......Die Information
.....Attachments
I. Device Description
A. General
The MAX6101 is a low-cost, low-dropout (LDO), micropower voltage references. This three-terminal reference has an
output voltage option of 1.25V. It features a proprietary curvature-correction circuit and laser-trimmed, thin-film
resistors that result in a low temperature coefficient of 75ppm/°C (max) and an initial accuracy of ±0.4% (max). This
device is specified over the extended temperature range (-40°C to +85°C).
This series-mode voltage reference draws only 90µA of supply current and can source 5mA and sink 2mA of load
current. Unlike conventional shunt-mode (two-terminal) references that waste supply current and require an external
resistor, this device offers a supply current that is virtually independent of the supply voltage (with only a 4µA/V
variation with supply voltage) and does not require an external resistor. Additionally, this internally compensated
device does not require an external compensation capacitor and is stable with load capacitance. Eliminating the
external compensation capacitor saves valuable board area in space-critical applications. Low dropout voltage and
supply-independent, ultra-low supply current makes this device ideal for battery-operated, high-performance, low-
voltage systems.
The MAX6101 is available in a tiny 3-pin SOT23 packages.
B. Absolute Maximum Ratings
Item
(Voltages Referenced to GND)
IN
OUT
Output Short-Circuit to GND or IN (VIN < 6V)
Output Short-Circuit to GND or IN (VIN = 6V)
Operating Temperature Range
Storage Temperature Range
Lead Temperature (soldering, 10s)
Continuous Power Dissipation (TA = +70°C)
3-Pin SOT23
Derates above +70°C
3-Pin SOT23
Rating
-0.3V to +13.5V
-0.3V to (VIN + 0.3V)
Continuous
60s
-40°C to +85°C
-65°C to +150°C
+300°C
320mW
4.0mW/°C