MAX5394MEVKIT Datasheet, PDF (2/12 Pages) Maxim Integrated Products – 1.7V to 5.5V Wide Input Supply Range

MAX5394M Evaluation Kit
Evaluates: MAX5394L—MAX5394N
Component List (continued)
DESIGNATION
R12
R13
SW_A0, SW_A1,
SW_UD
TP1–TP3
U1
QTY
1
1
DESCRIPTION
100Ω ±5% resistor (0603)
10kΩ ±5% resistor (0603)
3 DIP switches
0 Not installed, test points
50kΩ SPI digital
1 potentiometer (8 TDFN-EP*)
Maxim MAX5394MATA+
U2
U3–U5
U7
0
Not installed, digital
potentiometer (10 µMAX^®)
3
Level translators (10 µMAX)
Maxim MAX1840EUB+
1
Microcontroller (64 LQFP)
Maxim MAXQ622G-0000+
DESIGNATION
U8
U9
U10
VDD
Y1
—
—
—
*EP = Exposed pad.
QTY
1
1
0
1
1
1
6
1
DESCRIPTION
3.3V LDO (5 SC70)
Maxim MAX8511EXK33+
1.8V LDO (5 SC70)
Maxim MAX8511EXK18+
Not installed, ESD protector
(6 SOT23)
Red test point
12MHz crystal (HCM49)
USB high-speed A-to-B
cables, 6ft
Shunts
PCB: MAX5394M EVKIT
Component Suppliers
SUPPLIER
PHONE
WEBSITE
Murata Americas
800-241*6574
www.murataamericas.com
TDK Corp.
847-803-6100
www.component.tdk.com
Note: Indicate that you are using the MAX5394M when contacting these component suppliers.
MAX5394M EV Kit Files
FILES
INSTALL.EXE
MAX539XVxx.EXE
USBConverterDLL.DLL
UNINSTALL.EXE
DESCRIPTION
Installs the EV kit files on your
computer
Application program
Application library
Uninstalls the EV kit software
Quick Start
Required Equipment
● MAX5394M EV kit (USB cable included)
● Windows XP, Windows Vista, or Windows 7 PC with a
spare USB port
● Digital voltmeter (DVM)
Note: In the following sections, software-related items are
identified by bolding. Text in bold refers to items directly
from the EV kit software. Text in bold and underlined
refers to items from the Windows operating system.
Procedure
The EV kit is fully assembled and tested. Follow the steps
below to verify board operation:
1) Verify that all jumpers are in their default positions, as
shown in Table 1.
2) Set the DVM to measure resistance. Connect the
negative terminal of the DVM to the L test point and
connect the positive terminal to the W test point.
3) Visit www.maximintegrated.com/evkitsoftware to
download the latest version of the EV kit software,
MAX539XGUISetupVxx.ZIP. Save the EV kit software
to a temporary folder and uncompress the ZIP file.
4) Install the EV kit software on your computer by run-
ning the INSTALL.EXE program inside the temporary
folder. The program files are copied to your PC and
icons are created in the Windows Start | Programs
menu.
5) Connect the USB cable from the PC to the EV kit
board; the USB driver is installed automatically.
µMAX is a registered trademark of Maxim Integrated Products,
Inc.
www.maximintegrated.com
Maxim Integrated │  2