MAX509 Datasheet, PDF (2/20 Pages) Maxim Integrated Products – Quad, Serial 8-Bit DACs with Rail-to-Rail Outputs

Quad, Serial 8-Bit DACs
with Rail-to-Rail Outputs
ABSOLUTE MAXIMUM RATINGS
VDD to DGND ..............................................................-0.3V, +6V
VDD to AGND...............................................................-0.3V, +6V
VSS to DGND ...............................................................-6V, +0.3V
VSS to AGND ...............................................................-6V, +0.3V
VDD to VSS .................................................................-0.3V, +12V
Digital Input Voltage to DGND ......................-0.3V, (VDD + 0.3V)
REF_....................................................(VSS - 0.3V), (VDD + 0.3V)
OUT_..............................................................................VDD, VSS
Maximum Current into Any Pin............................................50mA
Continuous Power Dissipation (TA = +70°C)
16-Pin Plastic DIP (derate 10.53mW/°C above +70°C) ....842mW
16-Pin Wide SO (derate 9.52mW/°C above +70°C) .........762mW
16-Pin CERDIP (derate 10.00mW/°C above +70°C) ........800mW
20-Pin Plastic DIP (derate 11.11mW/°C above +70°C)....889mW
20-Pin Wide SO (derate 10.00mW/°C above +70°C) .......800mW
20-Pin SSOP (derate 10.00mW/°C above +70°C) ............800mW
20-Pin CERDIP (derate 11.11mW/°C above +70°C) ........889mW
Operating Temperature Ranges:
MAX5_ _ _C_ _ .....................................................0°C to +70°C
MAX5_ _ _E_ _ ..................................................-40°C to +85°C
MAX5_ _ _MJ_ ................................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note: The outputs may be shorted to VDD, VSS, or AGND if the package power dissipation is not exceeded. Typical short-circuit current
to AGND is 50mA. Do not bias AGND more than +1V above DGND, or more than 2.5V below DGND.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +5V ±10%, VSS = 0V to -5.5V, VREF = 4V, AGND = DGND = 0V, RL = 10kΩ, CL = 100pF, TA = TMIN to TMAX,
unless otherwise noted.)
PARAMETER
STATIC ACCURACY
Resolution
Total Unadjusted Error
Differential Nonlinearity
Zero-Code Error
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
8
VREF = +4V,
MAX5_ _A
VSS = 0V or -5V ±10%
MAX5_ _B
TUE
VREF = -4V,
MAX5_ _A
VSS = -5V ±10%
MAX5_ _B
DNL
Guaranteed monotonic
Code = 00 hex,
VSS = 0V
ZCE
Code = 00 hex,
VSS = -5V ±10%
MAX5_ _C
MAX5_ _E
MAX5_ _M
MAX5_ _C
MAX5_ _E
MAX5_ _M
Bits
±1
±1.5
LSB
±1
±1.5
±1
LSB
14
16
20
mV
±14
±16
±20
Zero-Code-Error Supply Rejection
Zero-Code
Temperature Coefficient
Full-Scale Error
Full-Scale-Error Supply Rejection
Full-Scale-Error
Temperature Coefficient
Code = 00 hex, VDD = 5V ±10%,
VSS = 0V or -5V ±10%
Code = 00 hex
Code = FF hex
Code = FF hex,
VDD = +5V ±10%,
VSS = 0V or -5V ±10%
MAX5_ _C
MAX5_ _E
MAX5_ _M
Code = FF hex
1
2
mV
±10
µV/°C
±14 mV
1
4
1
8
mV
1
12
±10
µV/°C
2 _______________________________________________________________________________________