 English |
|
|
|
|
|
|
|
| MAX4800_09 Datasheet, PDF (2/16 Pages) Maxim Integrated Products – Low-Charge Injection, 8-Channel, High-Voltage Analog Switches | |||
| |||
| ◁ |
Low-Charge Injection,
8-Channel, High-Voltage Analog Switches
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
VDD Logic-Supply Voltage .....................................-0.5V to +15V
VPP - VNN Supply Voltage ....................................................220V
VPP Positive-Supply Voltage ........................-0.5V to VNN + 220V
VNN Negative-Supply Voltage ..............................+0.5V to -220V
Logic Inputs LE, CLR, CLK, DIN ............................-0.5V to +15V
DOUT ............................................................-0.5V to VDD + 0.5V
RGND (MAX4802) .................................................-4.5V to +0.5V
COM_, NO_.................................................................VNN to VPP
Continuous Power Dissipation (TA = +70°C)
28-Pin PLCC (derate 10.5mW/°C above +70°C) ..........842mW
48-Pin TQFP (derate 22.7mW/°C above +70°C).........1818mW
26-Pin CSBGA (derate 11.8mW/°C above +70°C) .......941mW
Operating Temperature Range...............................0°C to +70°C
Storage Temperature Range .............................-65°C to +150°C
Junction Temperature Range ..........................................+150°C
Lead Temperature (Soldering, 10s).................................+300°C
Bump Temperature (Soldering) Lead-Free......................+260°C
Bump Temperature (Soldering) Lead ..............................+245°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +13.2V, VPP = +40V to VNN + 200V, VNN = -15V to -160V, TA = TMIN to TMAX, unless otherwise noted. Typical values
are at TA = +25°C.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
ANALOG SWITCH
Analog Signal Range
Small-Signal Switch
On-Resistance
Small-Signal Switch
On-Resistance Matching
VCOM_, (Note 2)
VNO_
VNN +
10
VPP -
V
10
TA = 0°C
30
VPP = +40V,
VNN = -160V,
VCOM_ = 0
ICOM = 5mA
ICOM =
200mA
TA = +25°C
TA = +70°C
TA = 0°C
TA = +25°C
TA = +70°C
26
38
48
25
22
27
32
TA = 0°C
25
RONS
VPP = +100V,
VNN = -100V,
VCOM_ = 0
ICOM = 5mA
ICOM =
200mA
TA = +25°C
TA = +70°C
TA = 0°C
TA = +25°C
TA = +70°C
22
27
30
Ω
18
18
24
27
VPP = +160V,
VNN = -40V
or
VPP = +185V,
VNN = -15V,
VCOM _= 0
ICOM = 5mA
ICOM =
200mA
TA = 0°C
TA = +25°C
TA = +70°C
TA = 0°C
TA = +25°C
TA = +70°C
23
20
25
30
22
16
25
27
ÎRONS
VPP = +100V, VNN = -100V,
VCOM_ = 0, ICOM = 5mA
5
20
%
Large-Signal Switch
On-Resistance
RONL VCOM_ = VPP - 10V, ICOM = 1A
15
Ω
Shunt Resistance
RINT
NO_ or COM_ to RGND (MAX4802), switch
off
30
35
50
kΩ
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese