MAX4554 Datasheet, PDF (2/28 Pages) Maxim Integrated Products – Force-Sense Switches

Force-Sense Switches
ABSOLUTE MAXIMUM RATINGS
(Voltages referenced to GND)
V+ ...........................................................................-0.3V to +44V
V- ............................................................................-25V to +0.3V
V+ to V-...................................................................-0.3V to +44V
All Other Pins (Note 1) ..........................(V- - 0.3V) to (V+ + 0.3V)
Continuous Current into Force Terminals .......................±100mA
Continuous Current into Any Other Terminal....................±30mA
Peak Current into Force Terminals
(pulsed at 1ms, 10% duty cycle).................................±300mA
Peak Current into Any Other Terminal
(pulsed at 1ms, 10% duty cycle).................................±100mA
ESD per Method 3015.7 ..................................................>2000V
Continuous Power Dissipation (T_A = +70°C)
Plastic DIP (derate 10.53mW/°C above +70°C) ...........842mW
Narrow SO (derate 8.7mW/°C above +70°C) ...............696mW
Operating Temperature Ranges
MAX455_C_ E ......................................................0°C to +70°C
MAX455_E_ E ...................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note 1: Signals on analog or digital pins exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to maxi-
mum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—MAX4554 (+20V, -10V Supplies)
(V+ = +20V, V- = -10V, VL = 5V, GND = 0V, V_{IN_H} = 2.4V, V_{IN_L} = 0.8V, T_A = T_MIN to T_MAX, unless otherwise noted. Typical values
are at T_A = +25°C.)
PARAMETER
SYMBOL
6Ω ANALOG SWITCH (FORCE)
Analog Signal Range
V_COMF,
V_{NOF_}
(Note 3)
CONDITIONS
On-Resistance
R_ON
V_COMF = 10V, I_COMF = 10mA
On-Resistance Match
(Note 4)
∆R_ON
V_COMF = 10V, I_COMF = 10mA
On-Resistance Flatness
(Note 5)
R_FLAT(ON)
V_COMF = +5V, 0V, -5V;
I_COMF = 10mA
NOF_ Off-Leakage Current
I_{NOF_(OFF)}
V+ = 22V, V- = -11V,
V_COMF = ±10V, V_{NOF_} = 10V
COMF Off-Leakage Current
I_COMF(OFF)
V+ = 22V, V- = -11V,
V_COMF = ±10V, V_{NOF_} = 10V
COMF On-Leakage Current
I_COMF(ON)
V+ = 22V, V- = -11V,
V_COMF = ±10V
Charge Injection
Q
V_COMF = 0, Figure 13
60Ω ANALOG SWITCH (SENSE-GUARD)
Analog Signal Range
V_COMS,
V_COMG,
V_{NOS_},
V_{NOG_}
(Note 3)
On-Resistance
R_ON
V_{COM_} = 10V, I_{COM_} = 1mA
On-Resistance Match
(Note 4)
∆R_ON
V_{COM_} = 10V, I_{COM_} = 1mA
T_A
MIN TYP
(Note 2)
MAX
UNITS
C, E
V-
V+
V
+25°C
C, E
3.5
6
Ω
7
+25°C
C, E
0.4
1
Ω
1.5
+25°C
C, E
0.5
1.5
Ω
2.0
+25°C -0.25 0.03 0.25
nA
C, E
-2.5
2.5
+25°C -0.5 0.03
0.5
nA
C, E
-2.5
2.5
+25°C -0.5 0.06
0.5
nA
C, E
-10
10
C, E
80
pC
C, E
V-
V+
V
+25°C
C, E
+25°C
C, E
34
60
Ω
70
5
8
Ω
10
2 _______________________________________________________________________________________