MAX4141 Datasheet, PDF (2/8 Pages) Maxim Integrated Products – 330MHz, 4x1 Precision Video Multiplexer

330MHz, 4x1 Precision Video Multiplexer
ABSOLUTE MAXIMUM RATINGS
VCC...........................................................................................6V
VEE ..........................................................................................-6V
VCC-VEE..................................................................................12V
Analog Input Voltage .......................(VEE - 0.3V) to (VCC + 0.3V)
Digital Input Voltage ...................................-0.3V to (VCC + 0.3V)
Duration of Short Circuit to Ground..............Continuous (Note 1)
Continuous Power Dissipation (TA = +70°C)
SO (derate 8.00mW/°C above +70°C) ........................640mW
Operating Temperature Range...............................0°C to +70°C
Storage Temperature Range .............................-65°C to +160°C
Junction Temperature ......................................................+150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note 1: If maximum power-dissipation rating is met.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VS = ±5V, -2.5V ≤ VIN ≤ +2.5V, RL = 5kΩ, CL = 5pF, TA = 0°C to +70°C, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
DC PARAMETERS
Operating Supply Voltage
Operating Supply Current
Disabled Supply Current
Input Voltage Range
Input Bias Current
Input Resistance
Input Capacitance
Output Offset Voltage
Power-Supply Rejection Ratio
Voltage Gain
Output Resistance
Disabled Output Current
Disabled Output Resistance
Disabled Output Capacitance
Logic Input High Voltage
Logic Input Low Voltage
Logic Input High Current
Logic Input Low Current
SYMBOL
CONDITIONS
VS
IS(ON)
IS(OFF)
VIN
IB
RIN
CIN
VOS
PSRR
AV
ROUT
IOUT(OFF)
ROUT
COUT
VINH
VINL
IINH
IINL
Enabled
TA = +25°C
TA = TMIN to TMAX
VIN = 0V
Channel selected
Channel disabled
Channel selected
Channel disabled
VIN = 0V, channel enabled or disabled
TA = +25°C
TA = TMIN to TMAX
VS = ±4.5V to ±5.5V
VIN = ±2.5V
TA = +25°C
TA = TMIN to TMAX
VOUT = 0V
VS = ±4.5V to ±5.5V
VS = ±4.5V to ±5.5V
VS = ±4.5V to ±5.5V
VS = ±4.5V to ±5.5V
MIN TYP MAX UNITS
±4.5 ±5.0 ±5.5
V
5.0
5.5
mA
6.5
250
350
µA
±2.5
V
±2.5 ±4.0
µA
±0.2
0.4
MΩ
100
3
pF
±3
±10
mV
±15
50
dB
0.98
1.0
V/V
0.97
1.0
20
Ω
10
nA
30
MΩ
5
pF
2.0
V
0.8
V
10
µA
10
µA
2 _______________________________________________________________________________________