 English |
|
|
|
|
|
|
|
| MAX3372E_07 Datasheet, PDF (2/31 Pages) Maxim Integrated Products – ±15kV ESD-Protected, 1μA, 16Mbps, Dual/Quad Low-Voltage Level Translators in UCSP | |||
| |||
| ◁ |
±15kV ESD-Protected, 1µA, 16Mbps, Dual/Quad
Low-Voltage Level Translators in UCSP
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
VCC ...........................................................................-0.3V to +6V
I/O VCC_......................................................-0.3V to (VCC + 0.3V)
I/O VL_ ...........................................................-0.3V to (VL + 0.3V)
THREE-STATE...............................................-0.3V to (VL + 0.3V)
Short-Circuit Duration I/O VL, I/O VCC to GND...........Continuous
Short-Circuit Duration I/O VL or I/O VCC to GND
Driven from 40mA Source
(except MAX3372E and MAX3377E) .....................Continuous
Continuous Power Dissipation (TA = +70°C)
8-Pin SOT23 (derate 8.9mW/°C above +70°C)...........714mW
8-Pin TDFN (derate 18.2mW/°C above +70°C) ........1455mW
3 x 3 UCSP (derate 4.7mW/°C above +70°C) ............379mW
3 x 4 UCSP (derate 6.5mW/°C above +70°C) ............579mW
14-Pin TSSOP (derate 9.1mW/°C above +70°C) ........727mW
14-Pin TDFN (derate 18.2mW/°C above +70°C) ......1454mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +1.65V to +5.5V, VL = +1.2V to (VCC + 0.3V), GND = 0, I/O VL_ and I/O VCC_ unconnected, TA = TMIN to TMAX, unless other-
wise noted. Typical values are at VCC = +3.3V, VL = +1.8V, TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
POWER SUPPLIES
VL Supply Range
VCC Supply Range
Supply Current from VCC
Supply Current from VL
VL
VCC
IQVCC
IQVL
1.2
5.5
V
1.65
5.50
V
130 300
µA
16 100
µA
VCC Three-State Output Mode
Supply Current
ITHREE-STATE-VCC TA = +25°C, THREE-STATE = GND
0.03
1
µA
VL Three-State Output Mode
Supply Current
ITHREE-STATE-VL TA = +25°C, THREE-STATE = GND
0.03
1
µA
Three-State Output Mode
Leakage Current
I/O VL_ and I/O VCC_
ITHREE-STATE-LKG TA = +25°C, THREE-STATE = GND
0.02
1
µA
THREE-STATE Pin Input Leakage
TA = +25°C
0.02
1
µA
ESD PROTECTION
IEC 1000-4-2 Air-Gap Discharge
±8
I/O VCC (Note 3)
IEC 1000-4-2 Contact Discharge
±8
kV
Human Body Model
±15
LOGIC-LEVEL THRESHOLDS (MAX3372E/MAX3377E)
I/O VL_ Input-Voltage High
VIHL
VL - 0.2
V
I/O VL_ Input-Voltage Low
VILL
0.15
V
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese