 English |
|
|
|
|
|
|
|
| MAX3346E Datasheet, PDF (2/17 Pages) Maxim Integrated Products – ±15kV ESD-Protected USB Transceiver in UCSP | |||
| |||
| ◁ |
±15kV ESD-Protected USB Transceiver
in UCSP
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND, unless otherwise noted.)
Supply Voltage (VCC) ...............................................-0.3V to +6V
Output of Internal Regulator (VTRM) ..........-0.3V to (VCC + 0.3V)
Input Voltage (D+, D-) ..............................................-0.3V to +6V
System Supply Voltage (VL) .....................................-0.3V to +6V
RCV, SUSP, VM, VP, MODE,
OE, SPEED, ENUM ....................................-0.3V to (VL + 0.3V)
Short-Circuit Current (D+, D-)
to VCC or GND (Note 1) ..........................................Continuous
Maximum Continuous Current (all other pins) ..................±15mA
Continuous Power Dissipation (TA = +70°C)
4 x 4 UCSP (derate 7.4mW/°C above +70°C).....589mW [B16-2]
14-Pin TSSOP (derate 9.1mW/°C above +70°C) ..727mW [U14-1]
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Bump Temperature (soldering) Reflow............................+235°C
Note 1: External 23.7⦠resistors connected to D+ and D-.
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VCC = +4V to +5.5V, GND = 0, VTRM = +3.0V to +3.6V, VL = +1.65V to +3.6V, TA = TMIN to TMAX, unless otherwise noted. Typical
values are at VCC = +5V, VL = +2.5V, TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
SUPPLY INPUTS (VCC, VTRM, VL)
Regulated Supply Voltage
VVTRM Internal regulator
3.0
VL Input Range
1.65
VCC Input Range
4.0
Operating VCC Supply Current
IVCC
Full-speed transmitting/receiving at
12Mbps, CL = 50pF on D+ and D-
Operating VL Supply Current
Full-Speed Idle and SE0 Supply
Current
Static VL Supply Current
Suspend Supply Current
Disable-Mode Supply Current
IVL
IVCC(IDLE)
IVL(STATIC)
IVCC(SUSP)
IVCC(DIS)
Full-speed transmitting/receiving at 12Mbps
Full-speed idle: VD+ > 2.7V, VD- < 0.3V
SE0: VD+ < 0.3V, VD- < 0.3V
Full-speed idle, SE0, or suspend mode
SUSP = OE = high
VL = GND or open
D+/D- Disable-Mode
Load Current
ID_(DIS) VL = GND or open, VD_ = 0 or +5.5V
Sharing-Mode VL Supply
Current
IVL(SHARING)
VCC = GND or open, OE = low,
SUSP = high
TYP
3.3
340
390
MAX UNITS
3.6
V
3.60
V
5.5
V
8
mA
6
mA
450
µA
500
5
µA
40
µA
20
µA
5
µA
20
µA
D+/D- Sharing-Mode
Load Current
ID_(SHARING) VCC = GND or open, VD_ = 0 or +5.5V
20
µA
LINEAR REGULATOR
External Capacitor
COUT Compensation of linear regulator
1
µF
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese