MAX2055EUP Datasheet, PDF (2/8 Pages) Maxim Integrated Products – RELIABILITY REPORT FOR MAX2055EUP PLASTIC ENCAPSULATED DEVICES

Conclusion
The MAX2055 successfully meets the quality and reliability standards required of all Maxim products. In addition,
Maxim’s continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim’s quality and
reliability standards.
Table of Contents
I. ........Device Description
II. ........Manufacturing Information
III. .......Packaging Information
IV. .......Die Information
V. ........Quality Assurance Information
VI. .......Reliability Evaluation
......Attachments
I. Device Description
A. General
The MAX2055 high-performance, digitally controlled, variable-gain, differential analog-to-digital converter (ADC)
driver/amplifier (DVGA) is designed for use from 30MHz to 300MHz in base-station receivers.
The device integrates a digitally controlled attenuator and a high-linearity single-ended-to-differential output amplifier,
which can either eliminate an external transformer, or can improve the even-order distortion performance of a
transformer-coupled circuit, thus relaxing the requirements of the anti-alias filter preceding an ADC. Targeted for ADC
driver applications to adjust gain either dynamically or as a one-time channel gain setting, the MAX2055 is ideal for
applications requiring high performance. The attenuator provides 23dB of attenuation range with ±0.2dB accuracy.
The MAX2055 is available in a thermally enhanced 20-pin TSSOP-EP package and operates over the -40°C to +85°C
temperature range.
B. Absolute Maximum Ratings
Item
All Pins to GND
Input Signal (RF_IN)
Output Power (RF_OUT)
Operating Temperature Range
Junction Temperature
Storage Temperature Range
Lead Temperature (soldering, 10s)
Continuous Power Dissipation (TA = +85°C)
28-Pin TSSOP
Derates above +85°C
28-Pin TSSOP
Rating
-0.3V to +(VCC + 0.25V)
20dBm
24dBm
-40°C to +85°C
+150°C
-65°C to +165°C
+300°C
2100mW
21.7mW/°C