English
Language : 

MAX1683EUKT Datasheet, PDF (2/9 Pages) Maxim Integrated Products – Switched-Capacitor Voltage Doublers
Switched-Capacitor Voltage Doublers
ABSOLUTE MAXIMUM RATINGS
IN to GND .................................................................+6V to -0.3V
OUT to GND .......................................................+12V, VIN - 0.3V
OUT Output Current............................................................50mA
Output Short-Circuit Duration .................................1sec (Note 1)
Continuous Power Dissipation (TA = +70°C)
SOT23-5 (derate 7.1mW/°C above +70°C)...................571mW
Operating Temperature Range
MAX1682EUK/MAX1683EUK ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +160°C
Lead Temperature (soldering, 10sec) .............................+300°C
Soldering Temperature (reflow) .......................................+260°C
Note 1: Avoid shorting OUT to GND, as it may damage the device. For temperatures above +85°C, shorting OUT to GND even
instantaneously will damage the device.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VIN = +5.0V, capacitor values from Table 2, TA = 0°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
No-Load Supply Current
Supply Voltage Range
Minimum Operating Voltage
Oscillator Frequency
Output Resistance
Voltage Conversion Efficiency
CONDITIONS
TA = +25°C
MAX1682
MAX1683
RLOAD = 10kΩ
TA = +25°C
TA = 0°C to +85°C
(Note 2)
TA = +25°C
MAX1682
MAX1683
IOUT = 5mA
TA = +25°C
TA = 0°C to +85°C
IOUT = 0mA, TA = +25°C
MIN
TYP MAX UNITS
110
145
µA
230
310
2.0
1.7
5.5
V
2.1
1.8
5.5
1
V
8.4
12
15.6
kHz
24.5
35
45.5
20
50
Ω
65
98
99.9
%
Note 2: Once started, the MAX1682/MAX1683 typically operate down to 1V.
ELECTRICAL CHARACTERISTICS
(VIN = +5.0V, capacitor values from Table 2, TA = -40°C to +85°C, unless otherwise noted.) (Note 3)
PARAMETER
CONDITIONS
MIN
No-Load Supply Current
MAX1682
MAX1683
Supply Voltage Range
RLOAD = 10kΩ
2.3
MAX1682
6.6
Oscillator Frequency
MAX1683
17.5
Output Resistance
IOUT = 5mA
Voltage Conversion Efficiency
IOUT = 0mA
97
Note 3: Specifications at -40°C to +85°C are guaranteed by design.
TYP MAX UNITS
160
µA
350
5.5
V
18.6
kHz
57.8
65
Ω
%
2 _______________________________________________________________________________________