MAX16800 Datasheet, PDF (2/9 Pages) Maxim Integrated Products – High-Voltage, 350mA, Adgustable Linear High-Brightness LED (HB LED) Driver

High-Voltage, 350mA, Adjustable Linear
High-Brightness LED (HB LED) Driver
ABSOLUTE MAXIMUM RATINGS
IN, OUT, and EN to GND........................................-0.3V to +45V
CS+, V5 to GND .......................................................-0.3V to +6V
CS- to GND............................................................-0.3V to +0.3V
OUT Short Circuited to GND Duration
(at V_IN = +16V) ........................................................60 minutes
Maximum Current Into Any Pin (except V_IN and OUT) .......±20mA
Continuous Power Dissipation (T_A = +70°C)
16-Pin TQFN 5mm x 5mm
(derate 33.3mW/^°C above +70^°C)............................2666.7mW
Operating Junction Temperature Range ...........-40°C to +125°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(V_IN = +12V, EN = V_IN, C_V5 = 0.1µF to GND, I_V5 = 0, CS- = GND, connect R_SENSE = 0.58Ω between CS+ and CS-. Connect OUT to
CS+ (Note 1). T_J = -40°C to +125°C, unless otherwise noted. Typical values are at T_A = +25°C.) (Note 2)
PARAMETER
Supply Voltage Range
Ground Current
Shutdown Supply Current
Guaranteed Output Current
Output Current Accuracy
Dropout Voltage (Note 3)
Output Current Slew Rate
Short-Circuit Current
LOGIC INPUT
EN Input Current
EN Input Voltage High
EN Input Voltage Low
Turn–On Time
CURRENT SENSE (Note 4)
Regulated R_SENSE Voltage
Input Current (CS+)
Input Current (CS-)
SYMBOL
V_IN
I_G
I_SHDN
I_OUT
∆VDO
CONDITIONS
(Note 1)
I_LOAD = 350mA
EN ≤ 0.6V
R_SENSE = 0.55Ω
35mA < I_OUT < 350mA
I_OUT = 350mA (current pulsed),
12V < V_IN < 40V
I_OUT = 350mA (current pulsed),
6.5V < V_IN < 40V
Current rising
Current falling
V_OUT = 0V, V_IN = 12V
I_EN
V_IH
V_IL
t_ON
EN rising edge to 90% of OUT
V_RSNS
V_SENSE = V_CS+ - V_CS-
V_CS+ = 220mV
V_CS+ = 220mV
MIN TYP MAX UNITS
6.5
40.0
V
1.4
3
mA
12
40
µA
350
mA
±3.5
%
0.5
1.2
V
0.5
1.5
V
5.4
mA/µs
90
400 600 800
mA
100
nA
2.8
V
0.6
V
135 350
µs
197 204 211
mV
-14
µA
+84
µA
2 _______________________________________________________________________________________