MAX1549 Datasheet, PDF (2/11 Pages) Maxim Integrated Products – MAX1549 Evaluation Kit

MAX1549 Evaluation Kit
Component List (continued)
DESIGNATION
C27, C28
QTY
DESCRIPTION
10µF ±20%, 6.3V X5R ceramic
2
capacitors (0805)
TDK C2012X5R0J106M or
Taiyo Yuden AMK212BJ106MG
D1, D2
1A, 30V Schottky diodes
2 Nihon EP10QY03 or
Toshiba CRS02
D3
JU1, JU2, JU6
JU3
JU4, JU5
JU1 (1,2) JU2
(1,2) JU6 (1,2)
L1
L2
N1, N3
N2, N4
100mA, 30V dual Schottky diode
1 (SOT23)
Central Semiconductor CMPSH-3A
3 3-pin headers
0 Not installed, 4-pin header
2 2-pin headers
4 Shunts
1
1.5µH, 7A power inductor
Sumida CDRH105R-1R5
1
4.7µH, 5.7A power inductor
Sumida CDRH124-4R7
2
N-channel MOSFETs (8-pin SO)
Fairchild FDS6612A
2
N-channel MOSFETs (8-pin SO)
Fairchild FDS6670A
DESIGNATION
R1
QTY
DESCRIPTION
0.012Ω ±1%, 0.5W resistor (2010)
1 IRC LR2010-01-R012-F or
Dale WSL-2010-R012F
0.015Ω ±1%, 0.5W resistor (2010)
R2
1 IRC LR2010-01-R015-F or
Dale WSL-2010-R015F
R3–R6, R22, R23
R7, R8, R27, R28
R9
R10, R15–R18
R11
R12
R13
R14
R19, R20, R24,
R25, R26, R29,
R32
R21
U1
None
None
0
Not installed (short PC trace)
(0603)
4 100kΩ ±5% resistors (0603)
1 10Ω ±5% resistor (0805)
5 100kΩ ±1% resistors (0603)
1 301kΩ ±1% resistor (0603)
1 487kΩ ±1% resistor (0603)
1 150kΩ ±1% resistor (0603)
1 66.5kΩ ±1% resistor (0603)
0 Not installed (0603)
1 0Ω ±1% resistor (0603)
1
MAX1549ETL
(40-pin thin QFN 6mm x 6mm)
4 Rubber bumpers
1 MAX1549 PC board
Component Suppliers
SUPPLIER
Central Semiconductor
Dale-Vishay
Fairchild
IRC
Murata
Nihon
Sanyo
Sumida
Taiyo Yuden
TDK
PHONE
516-435-1110
402-564-3131
408-721-2181
361-992-7900
770-436-1300
847-843-7500
619-661-6835
708-956-0666
800-348-2496
847-390-4373
FAX
516-435-1824
402-563-6296
408-721-1635
361-992-3377
770-436-3636
847-843-2798
619-661-1055
708-956-0702
847-925-0899
847-390-4428
Note: Indicate that you are using the MAX1549 when contacting these component suppliers.
WEBSITE
www.centralsemi.com
www.vishay.com
www.fairchildsemi.com
www.irctt.com
www.murata.com
www.niec.co.jp
www.sanyovideo.com
www.sumida.com
www.t-yuden.com
www.component.tdk.com
Quick Start
Equipment Needed
• 5V to 20V power supply, battery, or notebook AC
adapter
• DC bias power supply, 5V at 100mA
• Dummy loads capable of sinking 6A
• Digital multimeters (DMMs)
• 100MHz dual-trace oscilloscope
2 _______________________________________________________________________________________