MAX15029 Datasheet, PDF (2/10 Pages) Maxim Integrated Products – 1.425V to 3.6V Input, 500mA Low-Dropout Regulators with BIAS Input

1.425V to 3.6V Input, 500mA Low-Dropout
Regulators with BIAS Input
ABSOLUTE MAXIMUM RATINGS
IN, FB, SS, I.C. to GND..........................................-0.3V to +4.0V
BIAS to GND.............................................................-0.3V to +6V
EN to GND ................-0.3V to the lower of (V_BIAS + 0.3V) or +6V
OUT to GND ................................................-0.3V to (V_IN + 0.3V)
Output Short-Circuit Duration.....................................Continuous
Continuous Power Dissipation (T_A = +70°C)
10-Pin TDFN, Multilayer Board
(derate 24.4mW/°C above +70°C) ..............................1951mW
Junction-to-Case Thermal Resistance, θ_JC (Note 1)..........9°C/W
Junction-to-Ambient Thermal Resistance, θ_JA (Note 1)...41°C/W
Operating Junction Temperature Range ...........-40°C to +125°C
Maximum Junction Temperature .....................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-
layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(Circuit of Figure 1; V_IN = 1.8V, V_OUT = 1.2V, EN = IN for MAX15029, EN = BIAS for MAX15030, I_OUT = 100mA, T_{A =} T_J = -40°C to
+125°C. Typical values are at T_A = +25°C, unless otherwise noted.) (Note 2)
PARAMETER
IN
Input Voltage Range
Undervoltage Lockout
Undervoltage Lockout Hysteresis
Quiescent GND Current
Input Supply Current in Shutdown
BIAS (MAX15030)
Input Voltage Range
Undervoltage Lockout
Undervoltage Lockout Hysteresis
Quiescent Input Supply Current
SYMBOL
CONDITIONS
MAX15029
V_IN
MAX15030
V_BIAS = 3V to 5.5V
BIAS = IN
V_UVLO V_IN rising
MAX15029
MAX15030
V_{UVLO_HYST} I_OUT = 2mA
I_GND
V_IN = 1.425V to 3.6V, V_OUT = 1.2V,
I_OUT = 1mA, V_BIAS = 3.3V
V_IN = 3.6V, V_OUT = 3.3V, I_OUT = 100mA
V_IN = 3.3V, V_OUT = 3.3V, I_OUT = 500mA
I_{IN_SD} V_EN = 0 (T_A = -40°C to 85°C)
V_BIAS
V_{BIAS_UVLO}
I_BIAS
V_BIAS rising
I_OUT = 2mA
V_EN = V_BIAS
V_IN = 0, V_OUT = 0,
V_BIAS = 3.3V
MIN TYP MAX UNITS
1.425
3.600
1.425
3.600
V
3.000
3.600
1.275 1.325 1.375
V
1.04 1.09 1.14
50
mV
160
275
410
µA
180
325
560
170
315
470
0.1
5.5
µA
3
5.5
V
2.3
2.5
2.7
V
110
mV
20
60
120
µA
1.2
2
Input Supply Current in Shutdown I_{BIAS_SD} EN = GND
V_IN = 3.3V, V_OUT = 0,
V_BIAS = 3.3V
1.2
2
µA
V_IN = 3.3V, V_OUT = 0,
V_BIAS = 5V
1.5
3
2 _______________________________________________________________________________________