 English |
|
|
|
|
|
|
|
| MAX15006_11 Datasheet, PDF (2/14 Pages) Maxim Integrated Products – 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO | |||
| |||
| ◁ |
40V, Ultra-Low Quiescent-Current
Linear Regulators in 6-Pin TDFN/8-Pin SO
ABSOLUTE MAXIMUM RATINGS
IN to GND ...............................................................-0.3V to +45V
EN to GND..............................................................-0.3V to +45V
OUT, FB to GND.....................................................-0.3V to +12V
OUT Short-Circuit Duration ........................................Continuous
Maximum Current Into Any Pin (except IN and OUT) ......±50mA
Continuous Power Dissipation (TA = +70°C)
TDFN (derate 23.8mW/°C above +70°C) ........................1904mW
SO (derate 23.3mW/°C above +70°C)..........................1860mW
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
PACKAGE THERMAL CHARACTERISTICS (Note 1)
TDFN
Junction-to-Ambient Thermal Resistance (θJA) ...........42°C/W
Junction-to-Case Thermal Resistance (θJC) ...............8.5°C/W
SO
Junction-to-Ambient Thermal Resistance (θJA) ...........43°C/W
Junction-to-Case Thermal Resistance (θJC) ..................7°C/W
Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-
layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
Stresses beyond those listed under âAbsolute Maximum Ratingsâ may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VIN = 14V, IOUT = 1mA, CIN = 0.1μF, COUT = 2.2μF, TA = TJ = -40°C to +125°C, unless otherwise noted. Typical specifications are at
TA = +25°C.) (Note 2)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Input Voltage Range
Ground Current
Shutdown Supply Current
VIN
4
40
V
IOUT = 0A (MAX15006A/B)
10
17
IOUT = 0A (MAX15006C)
8
15
IOUT = 0A (MAX15007A/B)
11
18
IOUT = 0A (MAX15007C)
9
16
IOUT = 100μA
(MAX15006A/B)
10.5 18
IOUT = 100μA (MAX15006C)
8.5 16
IGND
Regulator on,
measured at GND
IOUT = 100μA
(MAX15007A/B)
IOUT = 100μA (MAX15007C)
11.5 19
μA
9.5 17
IOUT = 1mA (MAX15006A/B)
12
20
IOUT = 1mA (MAX15006C)
10
18
IOUT = 1mA (MAX15007A/B)
13
21
IOUT = 1mA (MAX15007C)
11
19
IOUT = 50mA (MAX15006)
90 150
IOUT = 50mA (MAX15007)
93 150
ISHDN Regulator off (MAX15007 only)
3
5
μA
2 _______________________________________________________________________________________
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese