English
Language : 

MAX1472 Datasheet, PDF (2/9 Pages) Maxim Integrated Products – 300MHz-to-450MHz Low-Power, Crystal-Based ASK Transmitter
300MHz-to-450MHz Low-Power, Crystal-Based
ASK Transmitter
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..........................................................-0.3V to +4.0V
All Other Pins to GND ................................-0.3V to (VDD + 0.3V)
Continuous Power Dissipation (TA = +70°C)
8-Pin SOT23 (derate 8.9mW/°C above +70°C)............714mW
Operating Temperature Range .........................-40°C to +125°C
Storage Temperature Range .............................-60°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(Typical Application Circuit, output power is referenced to 50Ω, VDD = 2.1V to 3.6V, VENABLE = VDD, TA = -40°C to +125°C, unless
otherwise noted. Typical values are at VDD = 2.7V, TA = +25°C, unless otherwise noted.) (Note 1)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX UNITS
SYSTEM PERFORMANCE
Supply Voltage
VDD
2.1
3.6
V
VENABLE = VDD
(Note 2)
5.3
9.2
fRF = 315MHz
VENABLE = VDD,
VDATA = VDD
9.1
16.4
Supply Current
VENABLE = VDD,
1.5
2.1
VDATA = 0V
IDD
mA
VENABLE = VDD
5.7
(Note 2)
fRF = 433MHz
VENABLE = VDD,
VDATA = VDD
9.6
Standby Current
Frequency Range
Data Rate
Modulation Depth
Output Power
Turn-On Time
Transmit Efficiency with CW
Transmit Efficiency at 50%
Duty Cycle
VENABLE = VDD,
VDATA = 0V
ISTDBY
VENABLE < VIL, TA < +85°C (Note 3)
VENABLE < VIL TA < +125°C (Note 3)
fRF (Note 1)
300
(Note 3)
0
ON to OFF POUT ratio (Note 4)
TA = +25°C, VDD = 2.7V (Notes 8, 9) 7.3
POUT TA = +125°C, VDD = 2.1V (Notes 8, 9) 3.3
TA = -40°C, VDD = 3.6V (Notes 8, 9)
tON
To fOFFSET < 50kHz (Note 5)
To fOFFSET < 5kHz (Note 5)
fRF = 315MHz (Note 6)
fRF = 433MHz (Note 6)
fRF = 315MHz (Note 7)
fRF = 433MHz (Note 7)
1.7
5
90
10.3
6.0
13.7
220
450
43.6
41.3
37.6
35.1
2.5
350
1.7
450
100
12.8
16.2
nA
µA
MHz
kbps
dB
dBm
µs
%
%
2 _______________________________________________________________________________________