MAX14586 Datasheet, PDF (2/9 Pages) Maxim Integrated Products – High-Current Overvoltage Protectors with Adjustable OVLO

MAX14586/MAX14590
High-Current Overvoltage Protectors
with Adjustable OVLO
ABSOLUTE MAXIMUM RATINGS
(All voltages referenced to GND.)
IN...........................................................................-0.3V to +40V
OUT.............................................................-0.3V to (V_IN + 0.3V)
OVLO.......................................................................-0.3V to +6V
Continuous IN, OUT Current (Note 1).....................................3A
Peak IN, OUT Current (10ms)..................................................5A
Continuous OVLO Current...................................................50FA
Continuous Power Dissipation (T_A = +70NC)
TDFN (derate 11.9mW/NC above +70NC)....................954mW
Operating Temperature Range........................... -40NC to +85NC
Junction Temperature......................................................+150NC
Storage Temperature Range............................ -65NC to +150NC
Lead Temperature (soldering, 10s).................................+300NC
Soldering Temperature (reflow).......................................+260NC
Note 1: Continuous current limited by thermal design.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional opera-
tion of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
PACKAGE THERMAL CHARACTERISTICS (Note 2)
TDFN
Junction-to-Ambient Thermal Resistance (B_JA)........83.9NC/W
Junction-to-Case Thermal Resistance (B_JC)............... 37NC/W
Note 2: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-
layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.
ELECTRICAL CHARACTERISTICS
(V_IN = +2.2V to +36V, T_A = -40NC to +85NC, unless otherwise noted. Typical values are at V_IN = +5.0V and T_A = +25NC.) (Note 3)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Input Voltage Range
Input Supply Current
IN Overvoltage Trip Level
V_IN
I_IN
V_{IN_OVLO}
V_IN < 5V
V_IN rising
V_IN falling
MAX14586
MAX14590
MAX14586
MAX14590
2.2
36
V
65
120
FA
6.8
7
7.2
14.5
15
15.5
V
6.73 6.93 7.13
14.35 14.85 15.35
IN Overvoltage Lockout
Hysteresis
V_{IN_OVLO_HYS}
1
%
OVLO Set Threshold
Adjustable OVLO Threshold
Range
V_{OVLO_THRESH}
1.18 1.223 1.26
V
4
20
V
External OVLO Select
Threshold
V_{OVLO_SELECT}
0.25 0.35 0.4
V
Switch On-Resistance
OVLO Clamp
OUT Capacitor
OVLO Input Leakage Current
Thermal Shutdown
R_ON
C_OUT
I_OVLO
I_OUT = 100mA, T_A = +25°C, V_IN = 5V
I_OUT = 100mA, T_A = -40°C to +85°C
I_CLAMP = 10FA, V_IN = 5V
V_{OVLO_THRESH} = 1.221V
48
81
mI
115
3.6
V
1000
FF
-100
+100 nA
+150
NC
Thermal Shutdown Hysteresis
20
NC
����������������������������������������������������������������� Maxim Integrated Products   2
*The parametric values (min, typ, max limits) shown in the Electrical Characteristics table supersede values quoted elsewhere in this data sheet.